Announcement

Collapse
No announcement yet.

Installing non-oem seats --- Rail question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 93SOHC
    replied
    got a good bit and plenty of punches. thanks again

    Leave a comment:


  • freshtiva
    replied
    To replace the gliders you would have to drill out the rivets that keep the tracks from separating. The rivets are pretty soft though and its easily done. Just use a center punch to start the drill on center and use some cutting oil at low rpm. I can post more pics if you need them.

    Last edited by freshtiva; 08-18-2008, 09:30 PM.

    Leave a comment:


  • 93SOHC
    replied
    Originally posted by freshtiva View Post
    "Any idea how to stop the wobble from stock festiva seat rails? "


    Replace these gliders. You probably have a broken one.


    so I have to disassemble the rails I would assume. when I took the cushions off the frames the rails were extremely over greased as well. I would assume I have 4 broken gliders case both seats do the same thing. If only there were 1 festiva in any junkyard near me...

    Leave a comment:


  • bhazard
    replied
    I REALLY wanna put my extra turbo coupe seats in my festiva. I do NOT want the power in the drivers seat though. That one seat has to weigh a good 80 lbs alone.

    Leave a comment:


  • freshtiva
    replied
    "Any idea how to stop the wobble from stock festiva seat rails? "


    Replace these gliders. You probably have a broken one.

    Leave a comment:


  • 93SOHC
    replied
    I did 92-93 Mx-3 seats. Was going to fab something to use the Mazda brackets but seemed like a p.i.t.a. so I had to use the festiva rails on the mazda seats. So now I have comfy seats but they still rock up and down. Any idea how to stop the wobble from stock festiva seat rails?

    Leave a comment:


  • festivaWES
    replied
    I like the color on the wall!!!

    Leave a comment:


  • benms79
    replied
    Originally posted by wrestler3025 View Post
    I opted for the prelude seats in both of my festivas. I like them quite a bit

    i like these seats,looks good, nice cat too!! lol

    Leave a comment:


  • tinwhisker
    Guest replied
    Muscle_Car1,

    Thanks for spending the time on that writeup -- I'm picking up some protege/escort GT seats on Tuesday, and I'll def be referring to it.

    Leave a comment:


  • wrestler3025
    replied
    If shipping wasn't so expensive Doug I would pull a set from the local pull a part for you. I think they are only $20-25 per seat. I saw a good passenger one there the other day, but the driver had a hole in the left outter lumbar area. Hopefully in a couple months I will have some festiva seats reupholstered. I have the two sets that I took out of my festivas in the garage, so I am going to take them appart and do a custom job on them in a few months....when I get time:-)

    Leave a comment:


  • packrat427
    replied
    Originally posted by wrestler3025 View Post
    I opted for the prelude seats in both of my festivas. I like them quite a bit
    That is what I am looking for 93 Prelude seats .

    Leave a comment:


  • freshtiva
    replied
    Here is a link to my aspire (festiva to you ) seat swap.

    Discuss enhancing your Festiva or Aspire interior and exterior (including custom paint, bodywork, seats, etc)

    Leave a comment:


  • wrestler3025
    replied
    I opted for the prelude seats in both of my festivas. I like them quite a bit

    Leave a comment:


  • Kofkof_00
    replied
    I did too.

    Custom brackets at the rear.


    Side


    Leave a comment:


  • GenevaDirt
    replied
    Oh...and here is another person that did a swap....musclecar.....



    LMAO

    Leave a comment:

Working...
X