323 cluster?

[Damkid]

awesome! i'll have to give it a try then. any problems or anything you ran into that i should know about when doing it? seems straight forward though

I wasn't the one who installed it so i can't help you there, sorry

[Festiva_tunner]

hahahah thats good..

PU is pm'd.

so are you publicly admitting to said illgal activity that will remain unmentioned????? lol

[Bazzy16]

awesome! i'll have to give it a try then. any problems or anything you ran into that i should know about when doing it? seems straight forward though

[Damkid]

i also have the cluster out of a 323GT sitting around and was wondering the exact same question. would it be possible to hook the stock festy wires to this cluster to make it work? for example if your trying too do say the low oil pressure light wouldn't you just take the wires from the festy cluster that controls it and hook them to the wire on the 323 cluster that controls the light and repeat for everything else?

Thats how my cluster is hooked up

[ejp2fast]

OH that comment just made my day - and my sig lmao

hahahah thats good..

PU is pm'd.

[Festiva_tunner]

epj2fast, there is another way!
As it is illegal to do this PM me.

OH that comment just made my day - and my sig lmao

[Bazzy16]

i also have the cluster out of a 323GT sitting around and was wondering the exact same question. would it be possible to hook the stock festy wires to this cluster to make it work? for example if your trying too do say the low oil pressure light wouldn't you just take the wires from the festy cluster that controls it and hook them to the wire on the 323 cluster that controls the light and repeat for everything else?

[Pu241]

epj2fast, there is another way!
As it is illegal to do this PM me.

[marinepolice03]

i know thereis a way to do it. with out the drill method i just cant rember how to do it though, i am shure someone will chime in.

[Tommychu]

how hard is it to change the mileage of a cluster to match the mileage of the car it is going in?
Also, for this 323 cluster, is the speedometer cable connection the same? (Plug with hole for the square cable)?

On a cable speedo, most are tamper proof. So most of the time it's a matter of hooking up the cable and sticking the other end into the chuck of a drill.
(making sure it's a cheap drill so there's no issue on duct taping the trigger and leaving it run full tilt for a day)

[ejp2fast]

how hard is it to change the mileage of a cluster to match the mileage of the car it is going in?
Also, for this 323 cluster, is the speedometer cable connection the same? (Plug with hole for the square cable)?

[Damkid]

My festiva also has the 323 cluster, but my festiva harness was re-wired to run the cluster

[fastivaB6TG25MR]

the 323 cluster is much wider... by about 4 inches i think... well at least the one i have is... that looks really nice

[Maxtiva]

My friend put a 323GT cluster in his Festiva but he also use the 323GT harness so I can't help you with the wiring. But it fit with a little trimming.

[ejp2fast]

If I remember right someone moded the 323 cluster in - it required some cutting and custom covering to make it work as well as some wiring changes - i cant remember who though

I'd also like to know that.