Announcement
Collapse
No announcement yet.
isuzu impulse rear springs?
Collapse
X
-
Im going to pick n pull this weekend , but before I do im reading up on 85 ford escort springs p/n moog cc832 .
-
Originally posted by dragsterdave View Postthanks for the help i will start looking up rio front springs
Leave a comment:
-
If no one on this forum answers in the affirmative about front to rear spring swaps then maybe you want to carve a piece of wood or else find a 4 + 1/4" cylinder for trial just to see if something in that size will actually fit in the arse end of a Festy. My 2 year experience with FMS springs is now over and if you say you want stiffer ones than that then all power to you. But I personally don't want to wear a kidney belt when driving.
Leave a comment:
-
You'll never get Impulse springs in there! OEM Festy and Aspire rear springs have an outside diameter of 3 7/8 inches and fronts are OD 4 3/16 inch (just now I went out and measured up a set). They have to be 'flat' across the top and do have to fit within the rear 'pocket' but I have heard tell of people installing front springs in the rear. Haven't tried it myself. But Impulse 3.9 + .47 + .47 = 4.85 in. is guaranteed way too big.
If front to back swaps are possible you might want to try out a set of Rio front springs.
Leave a comment:
-
isuzu impulse rear springs?
Hey guys I was just wondering your in put on a set of springs for the rear for my car , I already have fms springs but I won't stuffer springs.
I was looking on moogs web site and p/n cc631 witch is rear springs for a 83-88 isuzu impulse, if they would work. The specs are i/d of spring 3.881
wire dia .473 free height is 13 install height is 9.75 load is 390 and spring rate is 120lbs. oh and they are tangential springs.Tags: None
Leave a comment: