Announcement

Collapse
No announcement yet.

Westiva 2010!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I've probably got one lying around. If I can find it I'll bring it.
    Ian
    Calgary AB, Canada
    93 L B6T: June 2016 FOTM
    59 Austin Healey "Bugeye" Sprite

    "It's infinitely better to fail with courage than to sit idle with fear...." Chip Gaines (pg 167 of Capital Gaines, Smart Things I Learned Doing Stupid Stuff)

    Link to the "Road Trip Starting Points" page of my Econobox Café blog

    Comment


    • ah ya im still going 2, been trying to get a new tire on my left side as its reallllly bald, but if i dont ill still try and make it out there, if you see a blue festy on the side of the road its probably me! haha

      Comment


      • Originally posted by hermit View Post
        ah ya im still going 2, been trying to get a new tire on my left side as its reallllly bald, but if i dont ill still try and make it out there, if you see a blue festy on the side of the road its probably me! haha
        CAnadian tire... $32 installed plus enviro, I think it came to like $36 bucks... I wouldn't bother with the balancing either, those little tires seem good with out it usually.
        90 festiva BP/G25MR swap, spec v seats, aspire brakes, FMS springs, round headlight conversion with HID's, custom exhaust, fiberglass hood, and a whole lotta bodywork
        BEFORE AFTER

        Comment


        • Car is ready. Kind of. Good enough to go out there anyway.
          RX7 Seats to boot!

          Comment


          • ah the crappy tire i went to didnt have any 155/80/r12's and i also need a wheel alignment, also good year and wally world dont have 12's, and kal tire wanted 420$ for 2 tires and an alignment. pick n pull here i come

            Comment


            • I'm heading out to the campground today. Here's a rough sketch of the Wedge Pond parking area showing where we can park. I'm probably going to be there a bit early myself.

              See you all there!!!

              Ian
              Calgary AB, Canada
              93 L B6T: June 2016 FOTM
              59 Austin Healey "Bugeye" Sprite

              "It's infinitely better to fail with courage than to sit idle with fear...." Chip Gaines (pg 167 of Capital Gaines, Smart Things I Learned Doing Stupid Stuff)

              Link to the "Road Trip Starting Points" page of my Econobox Café blog

              Comment


              • well i guess ill be there around 10-11am on saturday.
                BP Festiva on MS2 with gsxr itbs Woot!!!

                Comment


                • Originally posted by hermit View Post
                  ah the crappy tire i went to didnt have any 155/80/r12's and i also need a wheel alignment, also good year and wally world dont have 12's, and kal tire wanted 420$ for 2 tires and an alignment. pick n pull here i come
                  Oops.

                  Just thought about it and I just scrapped my 12s a few weeks back when I aspire swapped. they had loads of tread left too.
                  Think I still have one... I'll check the shop tomorrow if you're interested.

                  Comment


                  • ah sorry tommy managed to find 2 tires with almost perfect treads at the JY, now i just gotta get the old tires off and the new ones on.. ill swap em onto my aluminum rims in the near future.

                    Comment


                    • well i made it to calgary, one close call with a deer and a few construction zones later.....see you all tomorrow and saturday..

                      if you are coming from the east, saskatchewan and such, there is a couple constructions zones on hwy 9 out of drumheller and apparently deerfoot in calgary has construction as well it is stampede week so traffic is nuts here... just a heads up...
                      90 festiva BP/G25MR swap, spec v seats, aspire brakes, FMS springs, round headlight conversion with HID's, custom exhaust, fiberglass hood, and a whole lotta bodywork
                      BEFORE AFTER

                      Comment


                      • i made it all the way out here to. i burned a wheel bearing up on the way but its all good now
                        made it from ont. to edmonton in 2days 5 hours rough trip lol
                        Last edited by mikeycar500; 07-08-2010, 11:31 PM.
                        the heart beat of america stops here______________/\
                        \/\_____________FORD
                        FOREVER

                        Comment


                        • Leaving at 0500 tomorrow, getting on the 0700 ferry. Hope to be arriving at Mt. Kidd by 10PM.
                          1988 Chevy Sprint Turbo 997cc

                          Comment


                          • dad did the same thing today and was in calgary by 8 your time 9 here so you should be good to make it to mount kidd... drive safe...
                            90 festiva BP/G25MR swap, spec v seats, aspire brakes, FMS springs, round headlight conversion with HID's, custom exhaust, fiberglass hood, and a whole lotta bodywork
                            BEFORE AFTER

                            Comment


                            • Originally posted by LittleHoe View Post
                              dad did the same thing today and was in calgary by 8 your time 9 here so you should be good to make it to mount kidd... drive safe...
                              Thanks, Brad. Gotta stop in Langley and pick up Sasquatch/Mike, but I don't think that should take more than a half-hour. I figure we'll do alright, I'd just like to get tent-functional before the sun goes down. Calgary's another hour from Wedge Pond, so we should be okay! Hopefully, if we go a little faster, we'll make it!
                              1988 Chevy Sprint Turbo 997cc

                              Comment


                              • should be in bed but i just started packing lol... see you guys tomorrow


                                Mike, AKA the sasquatch
                                1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                                Comment

                                Working...
                                X