Tweet
I couldn't get a stocker, so I used a antenna off of a Toyota a-post mount. Got it at CarQuest. It said it was a universal Toyoto unit. $18 dollors. Fit perfect,Had to drill a new upper hole,but it covered the orginal upper hole. Pulled the inside door roof trim,
[Clips, be careful!] On the mount hole outside, look inside the hole,down about 2" there is a hole on the inside above the seat belt slider. I pushed the wire through there and ziptied the wire to the seat belt wires,and pushed the wire through the dash. Ziptied the wire to the radio hole and put the trim back on. Worked perfect!!! Mark D
[Clips, be careful!] On the mount hole outside, look inside the hole,down about 2" there is a hole on the inside above the seat belt slider. I pushed the wire through there and ziptied the wire to the seat belt wires,and pushed the wire through the dash. Ziptied the wire to the radio hole and put the trim back on. Worked perfect!!! Mark D
Comment