B3 turbo pics and video

[bhazard]

Ahhhh we need that music-less video man!

[wf_festiva]

post some vids of you racing some ricers or if you put a b6 in and do a turbo you have to for sure!

[ketchup]

i just got my computer back from the shop i was out of hard drive space for movies. not anymore i got a 250 gig. ill post a link tonight no music. We are going to be charging 220 shipped for the manifolds plus a 50 core for a tube style aspire manifold. tuby style only will be counted as we cut the tubes off and reuse the flange..

[Nerd Racing]

how much for a manifold and injectors?

[Nerd Racing]

what did you get the injectors out of? B6?

[187festiva]

the injectors are from a 1.6 miata manifold 220 shipped plus a 50 core

[getnpsi]

the early b6 ports are the same as the aspire?

[ketchup]

well the aspire manifold is the same pattern as the festiva.. i heard with minor modification it will fit on the b6

[oxbrain]

The festiva/aspire manifold will fit the 8v B6, but not the 16v sohc B6 or the B6D. I don't think the port spacing is any different, but the bolt pattern definitely is.

[ketchup]

good to know b6 turbo with a t3, frontmount, blowthru vaf, bp injectors, is next

[ruppenduro]

any new vids, i'd love to see more. i got your pm about the mani, but i`m really debating rather to go with a t25 or just a 50 shot of nitrous.

[ketchup]

http://www.youtube.com/watch?v=ORihrahGSEw no music vid. we are going to do some racing this weekend film it. boost never runs out and is safer in my opinion unless you take precautions like timing retard and a window switch add fuel and such then your about the same cost as a turbo setup.. No2 is easier to install for sure tho.

[ruppenduro]

the car does seem to pull great. i have a leed on a good t28 for $75 i might go get it tommorow. seems like a t28 may be too laggy for a b3 though. do you have the turbo oil feed hooked in where the sending unit usually is? where did you get your oil lines or did you custom make them? also, are you running water hoses to the turbo? i hear they are not really necessary, but i tee'd them into the heater hoses on my nissan.

[ketchup]

it is tee'd off the sending unit and the line was made by evco house of hose, in town stainless steel braided. we did hook up the coolant lines to it. you dont need them but if you dont a turbo time is a must to cool it down.

[getnpsi]

Do you have a air/fuel gauge? How does the car run off boost/ idle with those b6D injectors?

When i click the no music movie, it kills my internet explorer. Not my computer, i cant DL firefox.