B3 turbo pics and video

[187festiva]

yes the festiva one will bolt to the aspire exhaust.

[Fastiva17]

Sweet thanks for that im trying to buy a t25 garnett turbo kit for a saab with intercooler for twoo hundred dollars so i think its a pretty good deal and its brand new.

[Fastiva17]

Someone told me as well that i may need a external oil pump to run the turbo but i dont think i will did anyone else use one.

[ketchup]

no need for an external oil pump you just tap into the engines oil..

[Fastiva17]

sweet thanks

[iceracerdude]

I'd run an .060 restrictor in a an-3 line. Will be plenty of oil and won't overload the seals.

[mraz]

awesome thread should help me alot.. i was planning on using the stock festiva mannifold and a flange off a dsm ? should work ?

[collegeboi]

Sorry I dont know the answer but I just wanted to say that this is where monsoon comes in and Adds a picture and a caption for ya. Just wait

[MONSOON]

Thanks collegeboi. But he doesnt get the award. You do for digging up an old thread with a pointless comment.
Congratulations!

[pr0nst4r]

pwnd...

[TominMO]

this is the only complete kit were going to sell. We are just going to make/sell the manifolds. Im not sure how much more power its making on 5psi it felt faster than my bp festiva and on 10 psi i bet it had slightly more than 100whp close to 110 at the wheels

I'm thinking that 5 psi should give it about 85 HP. The stock BP is 127. At 5 psi it would be as cheap or cheaper to stick in a B6 for about the same power--or a B8 for 100 HP. But don't get me wrong, I like the idea. It depends on your priorities. I will be having Greg rear-turbo my almost-stock Aspire motor (header, intake mods) this winter, prob with 8 psi. More power and keep the great stock mileage FTW!

Edit: Enjoyed the video, and I think your pricing is fair too.

[collegeboi]

Thanks collegeboi. But he doesnt get the award. You do for digging up an old thread with a pointless comment.
Congratulations!

Pwned haha man the wars we had man, I'm getting rusty. Imma get ya back Monsoon

[Aspire SVT]

great job on the mainfold. my project should be done shortly. i tried watching your vid ketchup but my phone screen is too small, ill look later.ill be posting more photos on my cardomain within prolly the next week or so. ive been itching to try out all of my work before winter. just sent my stainless downpipe to my welder buddy to tig in another o2 bung, i have 2, one for the wideband and one for stock single wire. and then my intake elbow is getting one installed for the isc trottle body bypass. i found my oil restrictor for my vj-14. ordered it new from mazda, got one of the last two left in the country as pre mazda parts locator. oil line is now completed. i may try the b6d injectors if the stockers arent enough, thanks for the tip.

cardomain.com/id/aspiresvt