Announcement

Collapse
No announcement yet.

Home made CAI

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Home made CAI

    I'm trying to put together a cold air intake using various bits and pieces I've picked up from the wreckers. I've found that Volvo turbos have great bits of hose, pipe and connectors for thier intercoolers.

    Can anyone recommend an effective way to clean the oil etc off the rubber hoses?

    Once I've got things set up I'll take some photos

    Cheers
    Ian
    Calgary AB, Canada
    93 L B6T: June 2016 FOTM
    59 Austin Healey "Bugeye" Sprite

    "It's infinitely better to fail with courage than to sit idle with fear...." Chip Gaines (pg 167 of Capital Gaines, Smart Things I Learned Doing Stupid Stuff)

    Link to the "Road Trip Starting Points" page of my Econobox Café blog

  • #2
    brake cleaner works good... but it may melt the rubber if its soft stuff... but i doubt it is cause its on a turbo car... i use hot water, soap and a stiff brush all the time, works great


    Mike, AKA the sasquatch
    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

    Comment


    • #3
      Soak them in simple green and hot water
      Oscar

      Comment


      • #4
        ^^x2 Simple green all the way


        -Scott
        Aqua 93 L
        Razor Red 09 F-150 XLT
        White 06 Ford Escape XLT

        Comment


        • #5
          light a match and fart on it..?

          Comment


          • #6
            go to the good ol dollar general and get a jug of "LA's Totally Awsome" it works on everything

            Comment


            • #7
              if u have a junk dish washer layin around do it that way soap and water works best dont try this at home kids
              FORD BUILT TOUGH SINCE 1987-1993 FORD FESTIVA LX

              Comment


              • #8
                Originally posted by 1988redfordfestiva View Post
                If u have a junk.
                Check, got that.
                Originally posted by 1988redfordfestiva View Post
                Dish washer layin around.
                Never heard of the dish washer. Can you explain this?
                Originally posted by 1988redfordfestiva View Post
                Do it that way.
                I still don't know what the Dish washer is. Is a position or a ....?
                Originally posted by 1988redfordfestiva View Post
                Soap and water works best.
                I'll try to remember this.
                Originally posted by 1988redfordfestiva View Post
                Don't try this at home.
                Then why did you tell us about it?
                Originally posted by 1988redfordfestiva View Post
                Kids.
                So this must be the result of doing the "Dish washer"?

                What does this have to do with a home made CAI?
                Last edited by nonamekid; 04-28-2010, 08:17 AM.
                The Festiva Store
                Specializing in restoration, tuning and custom parts.

                Comment


                • #9
                  ^^ ha. I was reading this at work laughing to myself. Everybody was wondering what was soo funny. What a smart a$$! Lol
                  And to answer your question they were talking about cleaning parts.
                  The new keeper of Uncle Fester!! 88 5-speed, efi, now with ac!
                  1988 LX ~sold~
                  1992 Blue GL auto, ac ~sold~
                  2008 Nissan altima 3.5sl loaded <lease returned>
                  1996 Nissan maxima <sold>
                  2002 ford f350 crew cab short bed diesel

                  Just remember, it could be worse, you could have a fork in your eye!!




                  Comment


                  • #10
                    Almost as helpful as takeone51's post :confused2:
                    Ian
                    Calgary AB, Canada
                    93 L B6T: June 2016 FOTM
                    59 Austin Healey "Bugeye" Sprite

                    "It's infinitely better to fail with courage than to sit idle with fear...." Chip Gaines (pg 167 of Capital Gaines, Smart Things I Learned Doing Stupid Stuff)

                    Link to the "Road Trip Starting Points" page of my Econobox Café blog

                    Comment


                    • #11
                      ^ lol, hey we are all tryin to help out here..

                      Comment


                      • #12
                        I've put some of those hoses in my parts cleaner and scrubbed them with a wire brush. Cleaned them up really well. Didn't notice any damage to the hose. Aerosol engine degreaser may work also. But the guaranteed safest way is soap and water and some elbow grease.
                        The Festiva Store
                        Specializing in restoration, tuning and custom parts.

                        Comment


                        • #13
                          Mineral Spirits will melt the grease in a heartbeat and not hurt anything.
                          Dan




                          Red 1988 Festiva L - CUJO

                          Black 1992 Festiva GL Sport - BLACK MAGIC

                          I'm just...a little slow... sometimes:withstupid:

                          R.I.P.
                          Blue 1972 Chevelle SS-468 C.I.D. B'nM TH400-4:56 posi-Black racing stripes-Black vinyl top-Black int.
                          Black on black 1976 Camaro LT-350 4 bolt main .060 over
                          Silver 1988 Festiva L

                          My Music!
                          http://www.reverbnation.com/main/sea...t_songs/266647

                          Comment

                          Working...
                          X