Dyno time for the bp!

[postman101]

This last weekend i finally got to see what the car made for power.

Mods
- mx-3 v6 MAF
- Exintake cam swap with corksport cam gears and -5 intake and +1 exhaust
- Obx header
- 2'1/4 exhaust

Car made 130whp and 121 wtq last year it made 119whp so i think i gained some good numbers. This is on a mustang dyno if anyone wants to know.

http://www.youtube.com/watch?v=yesAYosX2Zk

[sasquatch]

thats allmost the same as a b6t... thats awedsome

i cant wait to get mine going again...

we need some more vids some drag footage would be nice...

[postman101]

There is one more street legal i think then its done for the year. Ill see if i can make it out and get some vids. On a side note before the cam and header i did 15.7@86mph but i did notice with cam you need the rev allot high so i don't fall on my face at start.

[resuwrecked]

Nice numbers. Hmm, you have a MAF. Is your computer and harness from a late '95 or '96 car? You have a crank sensor at the crank pulley on that setup dont you.

[postman101]

Nice numbers. Hmm, you have a MAF. Is your computer and harness from a late '95 or '96 car? You have a crank sensor at the crank pulley on that setup dont you.

No the engine is pre 95 and its a AFM from a v6 mx3 the plunger type. I always forget what the heck these dam things are called lol.

[David88]

Nice. Thanks for the update. I have a question. Do you have your electric cooling fan set up to run all the time when the engine is on or does it run off the t-stat switch.

[postman101]

Nice. Thanks for the update. I have a question. Do you have your electric cooling fan set up to run all the time when the engine is on or does it run off the t-stat switch.

I have it running off the t-stat switch.

[skimsucka]

turbo it!

[manxbuggy1]

awesome!!

Dude, that is awesome. You have a very similar setup to mine. I have a pacesetter header though. I have the exhaust/intake cam swap but cant seem to get it dialed in right. We notched my gear for adjustment but still not right. I did not know that our our computers would read the maf. Have you got a stock egt computer? I was getting frustrated with this cam swap but after reading this post, I am now inspired and will keep on trying with some new adjustable cam gears. Thanks for a much needed shot in the arm!!

[schads]

Thats great numbers. i love the intake tube going to the other side so the battery can stay inplace. im going to have to try that with my swap its sweet.

[postman101]

Ya I had no plans on putting the battery in the back so I figured this should work.

[phyaz91]

T....tu....tur....turb....turbo....turbo turbo turbo

[skeeters_keeper]

Do you have more info on the AFM swap? I like that b/c its so much cleaner looking...

[aspireguy95]

i was also wondering how you ran the mx3 maf

[lanemeyer14]

Do you have more info on the AFM swap? I like that b/c its so much cleaner looking...

i was also wondering how you ran the mx3 maf

Sorry to dig this up, but I'm curious about the mx-3 maf as well. Definitely gives it a cleaner look!