Announcement

Collapse
No announcement yet.

G series casper clutch

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • G series casper clutch

    Who makes a good racing clutch for the g series?
    Im getting a cable g series with both axles and flywheel for $230
    $150 to ship however

    I can't wait to get a decent geared tranny in the car
    I had a SPEC in my mustang and it worked awesome. I've never bought a racing clutch for a FWD car
    Proud owner of Casper

  • #2
    By both axles you mean both cv axles and the intermediate shaft right?
    91GL BP/F3A with boost
    13.79 @ 100, 2.2 60' on 8 psi and 155R12's

    Comment


    • #3
      I already got the intermediate shaft
      Proud owner of Casper

      Comment


      • #4
        ACT, but i know everybody here is gonna say "go with the ebay cheapo"

        I beat mine daily. My motto on clutches is.......get the biggest baddest one and you will not out grow it.
        -Greg
        Euro-bprt...WORLDS FASTEST FESTIVA !!! 11.78@115.9
        BP, G trans, Megasquirt/ 550cc inj. t3/t3 (tbird) Garrett, REAR TURBO!!!! AND AC!!!!
        Redneck Engineer
        FOTY - '09
        5x Festiva Madness Attendee...FM 3,4,5,6,8
        http://www.youtube.com/watch?v=LpCZ7...9Pwqw-oe8s2OYQ
        http://www.youtube.com/watch?v=vU_eX...9Pwqw-oe8s2OYQ

        Comment


        • #5
          go with the ebay cheapo

          j/k... if you've got the green, empower the machine!
          1988 Chevy Sprint Turbo 997cc

          Comment


          • #6
            Look what came today
            who wants a intermediate shaft (I have an extra)
            Pm me offers
            Now I need a clutch and get spacers for mounts
            Casper will be ready to rock!
            Last edited by hamburglar; 04-30-2011, 01:47 PM.
            Proud owner of Casper

            Comment


            • #7
              Ok I searched and I have to run...
              You use the capri intermediate shaft and what axles do you need?
              I got one from the XR2 that came with the transmission.
              I see some people are using 323gt ones....will the XR2 ones work?
              Proud owner of Casper

              Comment


              • #8
                323GT and Capri XR2 are the same and you need thoses

                BPT, G5M-R, BP26 Exintake swap + Fidanza cam gear, NSRT4 FMIC + 2.5" piping, HKS SSQV BOV, Exedy clutch, 3" downpipe + 2" all the way back, Aspire brake swap, KYB GR-2 & FMS coil spring , FMS EURO body kit + Carbon fiber hood, Falcon RTX 15X6½ + Toyo proxes T1R 195/45R15

                Comment


                • #9
                  Sweet I thought so
                  Proud owner of Casper

                  Comment


                  • #10
                    I'm using the centerforce dualfriction from summit
                    -93' Festiva L (B6T swap in progress)
                    -92' XR2 Capri (Parts car)

                    Comment


                    • #11
                      ^ very nice clutch, you will like it


                      Mike, AKA the sasquatch
                      1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                      Comment


                      • #12
                        Brett, do you wanna sell your "old" clutch? I'm interested.
                        -Greg
                        Euro-bprt...WORLDS FASTEST FESTIVA !!! 11.78@115.9
                        BP, G trans, Megasquirt/ 550cc inj. t3/t3 (tbird) Garrett, REAR TURBO!!!! AND AC!!!!
                        Redneck Engineer
                        FOTY - '09
                        5x Festiva Madness Attendee...FM 3,4,5,6,8
                        http://www.youtube.com/watch?v=LpCZ7...9Pwqw-oe8s2OYQ
                        http://www.youtube.com/watch?v=vU_eX...9Pwqw-oe8s2OYQ

                        Comment


                        • #13
                          I am going to sell the old clutch out of casper.
                          I got to get the mounts first
                          anything about the spacers you were talking about at one time?
                          Proud owner of Casper

                          Comment


                          • #14
                            Originally posted by hamburglar View Post
                            I am going to sell the old clutch out of casper.
                            I got to get the mounts first
                            anything about the spacers you were talking about at one time?
                            Let me know about the clutch, and I'll gladly send you some spacers.
                            -Greg
                            Euro-bprt...WORLDS FASTEST FESTIVA !!! 11.78@115.9
                            BP, G trans, Megasquirt/ 550cc inj. t3/t3 (tbird) Garrett, REAR TURBO!!!! AND AC!!!!
                            Redneck Engineer
                            FOTY - '09
                            5x Festiva Madness Attendee...FM 3,4,5,6,8
                            http://www.youtube.com/watch?v=LpCZ7...9Pwqw-oe8s2OYQ
                            http://www.youtube.com/watch?v=vU_eX...9Pwqw-oe8s2OYQ

                            Comment


                            • #15
                              solid hub vs spring hub?
                              I know the differences (street driving)
                              but do you guys think that the g series or axles will explode if I get a solid hub clutch?
                              pricing is very similar. I kinda want a hardcore solid hub. But I do not want to grenade everything....
                              Opinions?
                              Proud owner of Casper

                              Comment

                              Working...
                              X