Intake manifold flange

[Christ]

Anyone know someone that can make one, and how much they'd charge me for it?

I dont' care if it's injection molded plastic, aluminum, steel, hypo-nucleic carboxy alloy, or tin-nickel, as long as it'll seal. (I'd actually prefer 3/8" HDPE plastic, honestly.)

I wanna get started on the IC project so I don't get frustrated and tear this OE carb apart and waste time fixing it when I'm just gonna change it out anyway.

I only need the flange with the holes in the proper orientation, I'll be bonding runners to it to position the openings to accept the carbs.

[Christ]

I have a scroll saw and a table-top drill press, but I'm lazy. Period.

[Pu241]

HDPE (High Density Polyethylene) is not a good candidate for this application. It's HDT value is likely too low. A PC-ABS alloy might be better, but aren't these typically made from a thermo-set material?

[iceracerdude]

Find a waterjet cutting equiped machineshop in your area, and just bring them the gasket. I have mine cut by a guy in California, but that's because the comany my wife works for does business with them, so I don't pay anything for the shipping. They've cut my exhaust manifolds and turbo flanges out of 3/8" 304 stainless.

[hotfordcat]

contact member Matt Dickmeyer on here. He can make you anything you need!!!

[M3NTAL]

Aaron Weir @ Weir technologies send him a gasket and he can get it done.

[Hot_Wheels]

+! for weirtec prices are damn good maybe 60 shipped?

[Rocketman]

I might be able to come up with an aluminum one for you if the other options don't work out. What carbs are you going to use?

[Christ]

Not totally sure what carbs yet. I was gonna use two set from Ninja 250, they're 30mm throat, but I also have a set from a ZX6 somewhere, but they need rebuilt and fire that cost, I can probably scavenge something better suited.

[Christ]

HDPE (High Density Polyethylene) is not a good candidate for this application. It's HDT value is likely too low. A PC-ABS alloy might be better, but aren't these typically made from a thermo-set material?

Whats a Neon intake made of?

[Pu241]

Whats a Neon intake made of?

Don't know send me a piece and I'll have it analyzed!

[Advancedynamix]

Whats a Neon intake made of?

The soles of the innocent. lol.

Check with the Australian market (eBay Aus, or PM Aussies on this site). They have a lot of different carb manifold combinations that we never saw here. Same thing with pacific island markets. If you could get a manifold for a side draft webber, that would be ideal and easy to jet.

Here is one
http://www.ebay.com.au/itm/NEW-FORD-...#ht_1207wt_113

[Advancedynamix]

Here is your flange
http://www.ebay.com.au/itm/Ford-1-3-...#ht_500wt_1144

[Advancedynamix]

Sorry, jumped the gun, neither of those will fit the B3, but you get the idea, there may be one like that for a B3 out there.

[Christ]

Don't know send me a piece and I'll have it analyzed!

I got told it was ABS. HDPE wont melt, but it wont keep its shape at anything approaching 200° fahrenheit.

Ill probably end up being less lazy sometime, especially if I keep working the pipeline as a guard. Long nights and hand tools..