Tweet
Will a b3 intake,ecu and exhaust manifold directly bolt to a b6 motor?
-
-
The intake and exhaust will bolt to an old style b6 (88-89 tracer or 323). I'm not sure they'll bolt to the newer engines.Festiva: Because even my dog can build a Honda.
---------------------------------------------------------------------------
'90 L. B8ME/Kia Rio 5 speed. Rio/Aspire suspension swap. :-D
'81 Mustang. Inline 6, Automatic.
'95 Eagle Summit Wagon. 4G64 Powered.
-
^^^ correct, they will bolt to the older ones (88-89) but they will not bolt to the 90 and up headsNo festiva for me ATM...Comment
-
Thanks for the infoComment
-
I thought as long as the b6 was a 8v head the b3 intake manifold would bolt on to it.You got the stickers I got the parts!Comment
-
would any of the intakes from the b6 with the throttle body on the side, not going over the vc bolt to the b3?89SX funtop! Fully loaded!
RIP 90LX
Comment
-
Nope I asked a similar question. There a 2 different heads for the b6. The over the VC head(before '90 323) & the side inlet head(after '90).
It's a good thing you don't read the stickies, you might of learned something.
Poverty produces creativityComment
-
We should clarify the "early" years for the B6. It was available from 85 to 89. Mine's an 87, and I saw a carbed 86 at the wreckers last weekend.
Comment
-
The F/I ones in 88 & 89 323, late 80's tracer.It's a good thing you don't read the stickies, you might of learned something.Poverty produces creativityComment
Comment