-
89SX funtop! Fully loaded!
RIP 90LX
-
What,Where and How???!?!?!
-Scott
Aqua 93 L
Razor Red 09 F-150 XLT
White 06 Ford Escape XLT -
^^ x2
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
Oh sweet jesus, where did you find that? A late 80's 626 turbo? I have been looking for an orange one like that.Comment
-
i think someone is jealous. lolOriginally posted by 25Horseplay
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
More like speedometer envy, I have been looking for one of those since the original article with no luck.
Comment
-
wich one are you going to use? i like the one in the last pic
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
The orange one came out a 84 626 (i think it was n/a...)
And i dont quite remember what the white one came out of... it was either a RX-7 or an MX-6 i think? It had a turbo whatever it was.. maybe it was a 626.
Either way the white one wont work without allot of modifications.. when i pulled it out i got really excited cause the tabs line up exactatally with the stock mounting tabs, spacing/angle, everything.. but the cluster is 1" too wide to fit in. That kinda sucks cause i'd prefer that one.
The orange one appears to be what the previous poster used so thats what ill probably go with.
Oh yea, i was searching google for a wiring diagram and i read somewhere that the digital dash was never used in US models... not sure if thats true.
Im always at the j/y and i jump in every mazda to look for goodies and these are the only 2 digitals i've ever found out of 100s of mazdas.89SX funtop! Fully loaded!
RIP 90LX
Comment
-
^I have saw one digital cluster from 323 Mazda in junkyard today but different layout than yours one... not sure if will fit from 323 Mazda... but why bother to do too much modify...I think it may need special ECU/sensor to make functions either? :roll:Comment
-
i think you need the fuel guage sending unit that goes w/ the digital cluster in order for the fuel guage to work correctly.Comment
-
^ that must have been a GT or GTX?
Its been done before so obviously its doable. And remember, we didn't get tach clusters, and iv been searching for one forever without luck. So this is one way for me to have a tach cluster. Plus i think digital would be sweeeet!89SX funtop! Fully loaded!
RIP 90LX
Comment
-
What kind of tach cluster were you looking for? MPH or KPH, white or orange?Comment
-
Originally posted by stefan
It was there GTX decal on body but engine was not B6T, just regular B6.
Today I went other yard and I was surprised the 1986 626 Mazda do have same yours one and I am going put up photo soon.... it's beauty looing wth digital cluster
that makes me think I would do lot mods...
Comment
-
Here the pic up! It's really shocking to see that i was able to find like that... this digital cluster was from 1986 626 Mazda LX and it have O/D lamp warning which stefan don't have one.
Comment
-
Did I miss it? Is there someone who actually installed one of these in their Festiva and got it running properly?
I'm still looking for one of the 110 MPH clusters... :\Simon - pimptiva.comComment
Tweet
Comment