Announcement

Collapse
No announcement yet.

completed door panels!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • completed door panels!

    Well, a few months ago I put the Honda Accord armrests and Mazda MPV map pockets on the passenger door. I just now got done with the drivers' side, and thought I'd post a pic.
    This way you can see the new door stuff, and the RX-7 wheel, etc all in one pic.


    Next up: new gauge graphics!

    (p.s. yes I am learning Turkish)
    If it has boobs or wheels, sooner or later you're going to have trouble with it.
    Mark S.

  • #2
    Looks awesome...might have to do it myself. The mpv pockets are already covered in carpet right?
    "Lane, I've been going to this high school for seven and a half years. I'm no dummy."

    Gone but never forgotten, "Hulkstiva"...http://www.fordfestiva.com/forums/sh...ht=progression

    Comment


    • #3
      is very clean, looks stock.... had not seen the inside of your vehicle, the console is are silver love the color
      if I write badly....thanks google translator

      Comment


      • #4
        what did you use to paint the interior trim?

        Comment


        • #5
          everything looks great, well done!

          Comment


          • #6
            That looks great!!!
            1960 willys pickup
            1967 jeep cj5

            1988 festiva
            1989 festiva
            1990 festiva for parts
            1991 s-10

            "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote!" —Benjamin Franklin, 1759

            Comment


            • #7
              I'd like to do rx-7 door armrests myself...
              ---------------------------------------------------
              The Jester - Midwest Festiva Inc., Missouri Chapter
              ---------------------------------------------------
              BUILD'EM CHEAP, RUN'EM HARD, REPAIR'EM DAILY!


              Comment


              • #8
                That looks real sharp looks factory
                what year accord did those armrests come off of?

                91 L - modified to SLX- "Tin Can Project"
                http://www.cardomain.com/ride/2850897
                92 GL - parts car
                97 aspire - parts car
                87 323 DX - daily driver

                Visit My Store - New Products available!
                http://www.cafepress.com/tunner

                Car enthusiasts will respect all makes and models that preform.
                Brand enthusiasts are the root of all problems in the car community.

                Comment


                • #9
                  Nice! I too would like to know what year they are off, and what the carpeted door pockets are off of, and what year RX-7 the wheel came off. And what you used to paint the interior pieces.
                  -Josh R

                  Comment


                  • #10
                    Armrests = '86-'89 Honda Accord. Somewhere here on FF.com I did a write-up on how to install. They need a little modification but pretty easy.

                    Map pockets = Mazda MPV, first gen. Unsure of year, really. Yes map pockets come with carpet. Grey and Tan are available. 4 screws on back holding it to door panel.

                    Steering wheel = First gen RX-7. Takes just a few minutes to install; a great upgrade.

                    Dash paint = automotive spray paint. Just prep correctly and it will stick.
                    If it has boobs or wheels, sooner or later you're going to have trouble with it.
                    Mark S.

                    Comment


                    • #11
                      looks sharp!
                      89SX funtop! Fully loaded!
                      RIP 90LX

                      Comment


                      • #12
                        sweet, I am totally keeping an eye out for that steering wheel!
                        -Josh R

                        Comment


                        • #13
                          is the rx-7 wheel smaller than the stock festiva wheel? i would like a new steering wheel but i dont like the look of a "momo"/"sparco" steering wheel, nevermind the price tag...


                          Mike, AKA the sasquatch
                          1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                          Comment


                          • #14
                            Beautiful!

                            Comment


                            • #15
                              I've never measured the difference....it feels about the same size, but the rim is a bit thicker so It does feel better in your hands as you drive. Also the horn button is in the middle where I like it. Btw, I got it at the pick-a-part; I think I paid $12.
                              If it has boobs or wheels, sooner or later you're going to have trouble with it.
                              Mark S.

                              Comment

                              Working...
                              X