Announcement

Collapse
No announcement yet.

Best Seats

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • festivaWES
    replied
    Swap out the bottom foam and fabric to the festiva wslider tracks, and keep the other donor seat back. Mx-3 and protege both work this way.

    Check out my protege seat swap thread.

    Leave a comment:


  • mattswabb
    replied
    Originally posted by shadetree View Post
    what is the best direct seat swap with no fab work if non then how hard are the protege seats to install
    Look at my posts for the prelude seats. They ARE the easiest swap.

    Leave a comment:


  • geezerstiva
    replied
    i dont think there are any that are direct swaps. they all require some modification either to the festiva or the seats you are swapping in. i think.

    Leave a comment:


  • shadetree
    replied
    best seats

    what is the best direct seat swap with no fab work if non then how hard are the protege seats to install

    Leave a comment:


  • knux511
    replied
    pretty much any 2door car with a backseat will let you have them move and fold foreward

    Leave a comment:


  • garylau
    replied
    Are there any other rear seats that work, even if I have to do a little custom work?

    Leave a comment:


  • blindcornbread
    replied
    Thanks for the input! I'm looking for easy installment. I do like a sporty look though.

    Leave a comment:


  • sasquatch
    replied
    Originally posted by stefan View Post
    9 way adjustable heated leather bmw seats
    pics NOW!!!! i have to see that.........

    also 1st gen mr2 seats are realy nice and hold you nice

    Leave a comment:


  • GenevaDirt
    replied
    Originally posted by mattswabb View Post
    Do a search for prelude seats. I used a set from a 93 and they were very nice, comfortable and supportive. Also the install was very easy.
    I have been in the car with these seats plus I fabbed some earlier ones in my car....a little harder of an install....and I must say....they are great!

    Leave a comment:


  • jr.fester
    replied
    2nd gen integra seats... have had a few sets in diff. vehicles over the years. love them and there easy to come by.

    Leave a comment:


  • gtrfestivia
    replied
    do the seats have to bolt right up because if not you chould use almost anything.

    Leave a comment:


  • mattswabb
    replied
    Do a search for prelude seats. I used a set from a 93 and they were very nice, comfortable and supportive. Also the install was very easy.

    Leave a comment:


  • bravekozak
    replied
    fabric replacement

    Go to the JY and look for a nice replacement piece of fabric. Cut the hog rings with a mini bolt cutter. Wash and reinstall back at the ranch. Don't take the whole seat or they'll charge you. If you turn the fabric inside out and roll it up in a ball, they may even just give it to you for free. Everyone should have an extra set of seat covers.

    Leave a comment:


  • Slyder
    replied
    i think B6T said that the 323gtx seats were great.
    ahh here it is "The seats are from a 323GTX and required the fabrication of brackets to fit in the Festiva. They are as much of a necessity to a Festiva as gas and oil... that's how much better they are then the stock plywood seats. 323GT (sedan) seats are not the same, they are a lot more flat and don't have nearly as much support and bolstering as the GTX seats." heres a picture.


    Leave a comment:


  • lanemeyer14
    replied
    I've got mazda mx-3 seats in mine. Very comfy and have a nice sporty look to them...

    Leave a comment:

Working...
X