Probe fog light switch

[hofficergrover]

Ok i got this fog light switch from a probe gt. I wanted to use it for my after market fog lights in my car because i didn't like the switch that came with them. So i got one and didn't get the plug with so i took one from the festiva it was part of the dash harness that went to the door harness. I had to take the wires out of it and rearange them to the pin pattern of the probe switch. So hear is what is what on the switch, Black is the one that goes to the power to the lights, Greenwith black tracer is the main power to the switch, Brown is to the running lights(so lights up when turn lights on), Green with red tracer is the ground, Blue with red tracer goes with the black( it is for the little light that comes on when button pushed in). I found out what was what by a volt meter and testing it on a battery. We took the green with black tracer and put on the + side of battary and the black on the - side and shorted the running light out and fried the black wire lol, so be carefull and hook them like i said.
ok hear are pics

[hofficergrover]

The wire we fried lol

The black wire

[hofficergrover]

The main power to switch

The running light wire

[hofficergrover]

Ground wire

For little light when button pushed in goes with black wire

Thats it not that hard to do.

[Festiva_tunner]

nice - think the fog light switch could be mounted in the factory deul location on the cluster trim?

[hofficergrover]

Probalby...um i was say try it post pics of it. I chose my spot because it looked the easiest to mod to fit. Ended up have to use duraglass to hold it in place.