Tweet
Hi ,just a little help, will these seats go straight into my 1990 festy??
-
-
Don't think they'll drop right in, but it probably wouldn't take much to modify them to fit. I've got Mazda mx-3 seats in my festy....I did have to modify the rails/mounts a good bit, but I only paid $40 for both seatsLast edited by lanemeyer14; 03-26-2010, 05:16 PM."Lane, I've been going to this high school for seven and a half years. I'm no dummy."
Gone but never forgotten, "Hulkstiva"...http://www.fordfestiva.com/forums/sh...ht=progression -
Anything is possible with some creativity and a welder.White '89L auto - Sold!
Silver '06 Rav4, 95k!Comment
-
Thanks for the reply, looking for something to bolt straight in if there are any, where Im from so many jap imports equals lots of parts.Originally posted by lanemeyer14 View PostComment
-
you won't find anything bolt in, also is your festiva a second gen like our aspire? if so talk to festymick, he has aftermarket seats in his.89 Festiva L Carby 4 Speed... RIP. Evicted and Scrapped. I HATE MY FAMILY
94 aspire 3 door Red -- Former BP, V6 KLDE swap underway! RIP... Rotted and Flooded out...
2012 Mazda 2 Touring 5 Speed... It's Very, Very, Very green... Daily Driver
1964 Barracuda 360 V8 Push Button 904 Auto, New Money Pit
Facebook Me!Comment
-
Nothing from another car that I know. But you can get a set of rails from Corbeau and use their seats. The rails are $94 each plus whatever the seats are.
I would modify the seat rails from another car.OscarComment
-
-
No welder needed. I didn't use one when I've put my seat in my car last week. I just use a hammer and a anvil.Originally posted by Tim View Post
BPT, G5M-R, BP26 Exintake swap + Fidanza cam gear, NSRT4 FMIC + 2.5" piping, HKS SSQV BOV, Exedy clutch, 3" downpipe + 2" all the way back, Aspire brake swap, KYB GR-2 & FMS coil spring , FMS EURO body kit + Carbon fiber hood, Falcon RTX 15X6½ + Toyo proxes T1R 195/45R15Comment
-
What seats did you use??I had a set of recaros from an evo 4 and modified the factory rails to fit, but sat too high, ended up buying another set of factory seats lol.Originally posted by Maxtiva View PostComment
-
Those one. Sorry this is the only pic I have.
BPT, G5M-R, BP26 Exintake swap + Fidanza cam gear, NSRT4 FMIC + 2.5" piping, HKS SSQV BOV, Exedy clutch, 3" downpipe + 2" all the way back, Aspire brake swap, KYB GR-2 & FMS coil spring , FMS EURO body kit + Carbon fiber hood, Falcon RTX 15X6½ + Toyo proxes T1R 195/45R15Comment
-
93-95 honda prelude seats are almost a direct bolt in. You need to oblong one hole and make 2 1 x 3 inch adapters for the seats out of 1/4 inch steel."FLTG4LIFE" @FINALLEVEL , "PBH"
89L Silver EFI auto
91GL Green Auto DD
There ain't no rest for the wicked
until we close our eyes for good.
I will sleep when I die!
I'm a little hunk of tin, nobody knows what shape I'm in. I've got four wheels and a running board, I'm not a Chevy, I'M A FORD!Comment
-
Cool thanks guys for the input.Comment
Comment