Tweet
did festivas ever come stock with body side moldings. I was at the junk yard today and there was a festiva there with side moldings. there below the door and go the length of the rocker panal. I took them off but they do need some work because the car was in a wreck. ill try to get some pics.
-
yes, please post some pics...89 Festiva L Carby 4 Speed... RIP. Evicted and Scrapped. I HATE MY FAMILY
94 aspire 3 door Red -- Former BP, V6 KLDE swap underway! RIP... Rotted and Flooded out...
2012 Mazda 2 Touring 5 Speed... It's Very, Very, Very green... Daily Driver
1964 Barracuda 360 V8 Push Button 904 Auto, New Money Pit
Facebook Me! -
yes they came stock on my 91 l.. pita to remove the glue under them..Comment
-
i removed mine also. 91 also glue easy to remove with pinstripe removal kit---------------------------------------------------
The Jester - Midwest Festiva Inc., Missouri Chapter
---------------------------------------------------
BUILD'EM CHEAP, RUN'EM HARD, REPAIR'EM DAILY!
Comment
-
you mean they actually sell pin stripe removal kits... wow, I have just been using razorblades all this time...89 Festiva L Carby 4 Speed... RIP. Evicted and Scrapped. I HATE MY FAMILY
94 aspire 3 door Red -- Former BP, V6 KLDE swap underway! RIP... Rotted and Flooded out...
2012 Mazda 2 Touring 5 Speed... It's Very, Very, Very green... Daily Driver
1964 Barracuda 360 V8 Push Button 904 Auto, New Money Pit
Facebook Me!Comment
-
all the pin stripe removing tool is, is an eraser disc you can get for your drill. or they sell actual eraser tools only for that purpose. I have one from schoolHarley Festiva DanComment
-
...
PICTURES PLEASE.Fast, fun and good gas mileage. 91' Festiva(RIP) and 96' Aspire(RIP). The website is no more.Comment
-
body kit
here are some of the pictures of the passenger side molding.
it was on a wrecked car so it is a little beat up
the cars rear bumpers were also smoother than mine they didn't have that small groove.Comment
-
Those pics look alot like what I have! Take a look at this.
I bought those side moldings and the pieces from the rear bumper for my project car. Looks very similar to what you have foundPaul
91GL
Menomonee Falls, WIComment
-
...
Ok, What you are actually looking at is one of the ONLY bodykits Mass produced for the Festiva. This particular kit was manufactured by KOBEL - they don't make them for the FESTIE anymore. They are a company that sells through JC Whitney. The kit is manufactured out of ABS plastic. It is a very brittle kit. I only have a set of sideskirts from a kit myself. The fronts and rears usually get destroyed and are either not on the car or in pieces. If you can get the front and rear from the car, you would have a complete kit. If not, can you get some more pictures of them just so the rest of us can see what they look like?Fast, fun and good gas mileage. 91' Festiva(RIP) and 96' Aspire(RIP). The website is no more.Comment
-
Re: body kit
Do you have to cut/weld any of the rear quarter panel unibody for those skirts, or do they just overlap the stock frame? Are the FMS similar?
'92 Festiva LComment
-
you dont need to modify the body at all. The car i got them off was creamed in the front but i believe that the rear bumper is still in goog condition. The molding do need some work as you can see. The passenger side molding is in the best condition, but the driver side is in two peices but i am going to try to get them repaired.Comment
Comment