A while back i remember seeing a link to ebay where there was a 3 gauge pod that fit right in the festiva radio bezel and now i can't find it again can anybody help me find it please?
-93' Festiva L (B6T swap in progress)
-92' XR2 Capri (Parts car)
Yeah, the one I made for my car is plexiglass and painted.
Before it was painted. I used a dremel with a routing bit instead of a holesaw because I had it. Middle gauge is boost, lol.
Current cars:
1993 Ford Festiva 5-Speed - Festiclese III - Cousin of the Banhammer - "The Jalopnik Car"
1984 Toyota Cressida - 2JZGE Swap, Turbocharged.
2013 Mazda Mazda2 - Exhaust and Wheels (the daily)
2002 Toyota Tundra - V6/Auto/2WD - The Tow Vehicle.
Chrisofna I like don't use that at all unless I'm defogging the windows, or warming up the fall/winter. Did you move it to another location or just took it out completely.
Frankie
fully custom 88 festy (project doomsday) Febuary in 2012 calander
Blockspire: ken block replica aspire
AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man
Looks good but the one i saw had the gauges tilted up and towards the driver i thought they looked pretty cool. If i can't find it I'll probably just end up using this method
-93' Festiva L (B6T swap in progress)
-92' XR2 Capri (Parts car)
Chrisofna I like don't use that at all unless I'm defogging the windows, or warming up the fall/winter. Did you move it to another location or just took it out completely.
Took it out completely; I have no heater. I don't plan on driving the car in the winter. When I move I should have a winter beater.
Current cars:
1993 Ford Festiva 5-Speed - Festiclese III - Cousin of the Banhammer - "The Jalopnik Car"
1984 Toyota Cressida - 2JZGE Swap, Turbocharged.
2013 Mazda Mazda2 - Exhaust and Wheels (the daily)
2002 Toyota Tundra - V6/Auto/2WD - The Tow Vehicle.
Nice I got a snow spire for my beater can't waits to have some festy company in CT
Frankie
fully custom 88 festy (project doomsday) Febuary in 2012 calander
Blockspire: ken block replica aspire
AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man
Yeah my car is rust free and will stay rust free, lol.
Current cars:
1993 Ford Festiva 5-Speed - Festiclese III - Cousin of the Banhammer - "The Jalopnik Car"
1984 Toyota Cressida - 2JZGE Swap, Turbocharged.
2013 Mazda Mazda2 - Exhaust and Wheels (the daily)
2002 Toyota Tundra - V6/Auto/2WD - The Tow Vehicle.
Good luck wit the rust free part we basically drive on ice salt and sand half the year so that doesn't help
Frankie
fully custom 88 festy (project doomsday) Febuary in 2012 calander
Blockspire: ken block replica aspire
AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man
My friend is holding onto a Maxima that will take the salt and sand for it.
Current cars:
1993 Ford Festiva 5-Speed - Festiclese III - Cousin of the Banhammer - "The Jalopnik Car"
1984 Toyota Cressida - 2JZGE Swap, Turbocharged.
2013 Mazda Mazda2 - Exhaust and Wheels (the daily)
2002 Toyota Tundra - V6/Auto/2WD - The Tow Vehicle.
fully custom 88 festy (project doomsday) Febuary in 2012 calander
Blockspire: ken block replica aspire
AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man
Yeah I refuse to drive the Festy in the salt, heck I won't let it near the ocean, lol. If he gets rid of it quick I'll find something.
Current cars:
1993 Ford Festiva 5-Speed - Festiclese III - Cousin of the Banhammer - "The Jalopnik Car"
1984 Toyota Cressida - 2JZGE Swap, Turbocharged.
2013 Mazda Mazda2 - Exhaust and Wheels (the daily)
2002 Toyota Tundra - V6/Auto/2WD - The Tow Vehicle.
i cut my vents out and fiberglassed them shut then cut holes in them... looks allmost factory and places them up nice and high so you can see them easy
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...
That's dope I wanna do that but I already airbrushed and finished my bezel
Frankie
fully custom 88 festy (project doomsday) Febuary in 2012 calander
Blockspire: ken block replica aspire
AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man
fully custom 88 festy (project doomsday) Febuary in 2012 calander
Blockspire: ken block replica aspire
AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man
Comment