isuzu stylus bumber installed!

[fastivaB6TG25MR]

i resized the pics so give it a few for the changes to go through photobucket

i got my turn signals modified and mounted

i took the stock stylus turn signal and cut the front part off where the lens mounts.




then i cut the outside edge off of the stock festiva turn signal. the cut one is on top


using a small butane torch i melted/plastic welded the festiva bulb portion to the stylus lens portion.



i also had to cut the small top and bottom lip in the far back of the turn signal hole inside the bumper itself. i didnt get any pics of this.


and after 3 tries with my flashers on i finally got a pic with the lights on.

[perucho]

Nice

[ppasqual]

i also have the kia pride corners and grill for sale, heres the link with pics http://www.fordfestiva.com/forums/sh...ad.php?t=31387

[GenevaDirt]

Oh wow looks nice but at the same time I think all the holes don't match well with the festiva grille. Maybe a cutout and floating emblem treatment?

I think it would look really good with the little vertical supports cut out and the same mod done to the grill as what hulk had done. His is painted like I am talking about but the supports are still there.