LED front turn lights

[Movin]

A little up date on front turns, new ones at a reasonable price are pretty scarce
and these LED ones are fairly inexpensive.

Here is the item number on Ebay to the ones I ordered, I also ordered another set from another company and they are the same.

360423103278

[getnpsi]

can you double them up on top of each other and buy 4 to make them extra bright and fill the hole in better?

[Movin]

Did you mean like this ??

[Movin]

Here is the driving light mode, After checking it out after dark I am going to disable this mode. They are to blue and our state doesn't like to share these colors!

[Movin]

Here is the 4 ways on, I love the amber ! These are one tough light. when I remove them to disable the "driving" light I think I will add some more fasteners as I don't trust double sided body tape over the long term. One more thing, OEM flashers like lots of amps and LED lights don't have any..I have another flasher being overnight-ed in for tomorrow.

[getnpsi]

Very nice. you could probably go for 3 with a hit of a dremel. You cant go wrong for the price either. You could repurpose the blues for interior and cargo, or 3rd brake light. Are you able to cut to length with these or are they in series and it dies? You can buy rolls if it in 12v cheap too, with no plastic piece with it.

[Movin]

I did not try any of that and there is not any instructions that lead me to believe it is possible. Is that common for rope LED lights?

[getnpsi]

Yes I bought a bunch off ebay to put under kitchen cabinets and for underhood. Very versatile

[Movin]

I made a sheet metal mount that moved them 3/4 inch out. I could used a 3rd one where those mounting screws are just run the screws right through the middle ? Or did you mean trim the edges so 3 could fit side by side ?

[pyrothehitman]

do they come in green? if so, i will buy some.

[Movin]

I did searches for turn lights LED so my searches are weighted toward Amber and that is mostly all I saw. I did not see any green. Around town I have seen green LED rope lights and neon lights, so they must be coming from ebay or somewhere. The LED ones don't break as quick.

[alpaccino]

How would it look if the cover of the regular turn lights was placed over the LEDs, I am thinking of giving it a new car factory LEDs look. I don't like how it look when it's not blinking/on.

[Movin]

Thats a good idea, they might be a little dimmer than they are now.
Another update, A buddy kept fooling with them trying to see what they were and the double sided body tape came loose on one. I pulled them all and fastened them as shown below, fairly well buddy proofed. I like it way better than stock but not quite as well like this, except I will have no more trouble with them. I also unhooked the bluish driving lights as our Oregon Police will not allow that color anywhere while on the road.

[sharkstiva]

that's a radtastical paint job duder.

[crazyrog17]

I couldn't tell from your sig if it was glittery metallic or what. That pic clears up my questions, hahaha.