Tweet
Just a quick question since I'm relatively new to festiva's...what interior bits from an aspire would fit my tiva? Mainly looking to see if the seats are a direct bolt in...can't really find any good tiva seats out my way
-
Last edited by dubnut16v; 10-06-2017, 10:31 PM. -
There are plenty of guys running Aspire seats on here. If you go to the Forum and then scroll down to the heading for "custom interior and exterior" click on to it and scroll through it you will find the information. I believe the easiest is way is to retain the festiva lower seat frame and use the foam and upholstery from the Aspire on the Festiva lower frame. I remember reading on here that the Aspire seat back will fit on the Festiva frame. I have not tried this personally so like I said you may find better information under "custom interiors"
Good Luck!'88 Festiva LX 5 speed, A/C, Carb, restored $$$ body paint, badly wrecked @ 200k.
'93 Festiva L, 5 speed, Aqua, bought from the original owner,.Zero rust but very nasty otherwise. Awaits the B6T.
'91 Festiva L, 5 speed, bought to drive while putting the B6T in the '93. now B6ME powered. -
Rick is correct you just bolt the back to the festiva seat bottom and re hog ring or zip tire the cover and cushion to the festiva bottom this also works for the escort, protégé and tracer seats. I have the escort ones and love them although you will give up some lay back with the escort seat back . The mechanism dosnt lay back as far as the festiva.Comment
Comment