full egt swap

[sasquatch]

i was reading the egt rear brake swap thing...

http://p074.ezboard.com/ffordfestivaaspirefrm35.showMessageRange?topicID=140.topic&start=1&stop=20

has anyone done a front and rear egt brake swap with the master cyl? so the balance is not affected. i know the master cly will bolt in, but will the front spindles bolt in? any info will be appreciated.

[nonamekid]

the front spindles have a different spline count so the axles we use won't work, and there are no axles that are the right length with that spline count.

[sasquatch]

so what you are saying is that it wont work... can i stick the egt brakes on aspire spindels?

[IdealSociety]

if you made a set of simple caliper adapters it wouldnt be too horribly difficult

[FestYboy]

wait, if the EGT spindles share the same bearings as the aspire bearings, they can be swapped, and therefore it'll work.

[sasquatch]

ill look in to it when im at the jy.