Announcement

Collapse
No announcement yet.

did i mess up on my aspire suspension conversion?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • did i mess up on my aspire suspension conversion?

    i was under the impression that the lower control arsm of the aspire were an integral part of the swap. i measured them and it appears they are longer than festiva units.
    i already have the aspire lca's mounted on the car and i already threw the old worn out festiva units away.

    will these aspire lca's work or do i need to buy a set of festiva lca's?
    all the faqs i have read are sketchy on this aspect. most assume you are going to re use the festiva lca's, but none actually say NOT to use the aspire lca's

  • #2
    You need to use the Festiva lower control arms, the aspires are longer. If you use the Festiva shafts and the aspire control arms the shaft can pop out of the tranny since they are being "stretched".

    matt

    BP Festiva http://www.cardomain.com/ride/723319 - SOLD
    BPT Festiva www.cardomain.com/ride/2260009 - SOLD
    BPT GTX www.cardomain.com/ride/2436495 - SOLD
    New GTX - http://www.cardomain.com/ride/3294846/ - SOLD

    Comment


    • #3
      thats what i was thinking.

      thanks.

      Comment

      Working...
      X