KIA rims on stock Festiva?

[BigElCat]

I found a set of 4 KIA alloys at the junkyard. They're 14" inch with the stock Festiva bolt pattern. But I could not get the wheel on the Festiva hub. I couldn't get the center hole to go on. I measured it, but I didn't have a metric tape. It was just over 2 1/4". It had to be a 59mm hole....?

The center hole looked big enough. The tire had the steel wire poking out and I didn't have gloves.

Anyone know about KIA wheels? The car was a sporty 4 door about the size of a Honda Accord, mid 1990s. No model name anywhere on it.

[BigElCat]

My bad. I looked at the rims again. 4on100mm. Won't fit the stock Festiva.

This post could be deleted. Sorry.

[MONSOON]

That list really needs to be updated to include Kias. There are none on it. Although I suspect that models like the Sephia and Rio would probably have the 4 x 100mm pattern. Other models like the Optima may have a 5 bolt pattern, but Im not certian.

[JPT]

Optimas are 5 bolt.

[festivaWES]

most kia's will be 4x100..the newer ones anyways. 95-99 hyundai accent had the 4x114.3 pcd bolt pattern and they came with some pretty nice looking stock alloys.

[BigElCat]

I'm going to try to post a link:http://www.discountedwheelwarehouse...._Reference.cfm

Link works on my computer. These guys say the KIA Optima uses the 4on114.3 like the stock Festiva. That's why I was checking out KIAs in the first place.

[MONSOON]

Now that is an AWESOME link BEC! You should post it in the "Festiva/Aspire Custom Info" sticky at the top

[muscle_Car1]

the rio has 4x100, and since the 95-97 sephia is a bg chassis i would assume its also 4x100

[JPT]

Nice link. They don't show it, but the latest model Optimas are 5 lug. 5x114mm