Enough With The Dang Rim Questions Collegeboi :p

[collegeboi]

Well I have been searching for 13 inch rims for a few weeks now.

I went from 10 gtx rims to, why would i need that much and i would rather have 13 inch rims

SOOOOOOOOOOOOOOOO

http://honolulu.craigslist.org/oah/for/811177663.html

4 mag 13 inch rims. Guy said its 15 years old and doesnt know the offset/width

It looks deep and will stick out but my question is how to figure out THE OFFSET/WIDTH.

guy has no idea. I want to just jump n it 4 rims for 40 $$ did i mntion thier mag.




I searched the tires and only got this

http://te51levin.superjamie.net/hrm2.html

We received our set of 13x51f2-inchers, along with a set of Penney's gigantic new B60x13 Scat Trac 60 Competition Profile tires.

^^^^^^ could be a clue that the rims are 5.5 wide


My 2 questions are
How to find offset/width based on tires/ ad (if possible)
would all 13 inch tires fit it or a special kind of 13 inch tire, being its wider?

[festivaWES]

old slot mags probably from a mustang or something...offset is close to "0" is my guess...they'll stick out bad

[ejp2fast]

old slot mags probably from a mustang or something...offset is close to "0" is my guess...they'll stick out bad

Yeah, i'd say so too...

[collegeboi]

ok so they will stick out???? how about the turning, bumps etc.

[CharlieZ]

Wheel offset? Here's just one of many search hits. http://www.1010tires.com/WheelOffsetCalculator.asp

[JPT]

Looks to me that one set is +25mm and the other is 0 offset. Both sets will stick out.

[collegeboi]

ok both will stick out, we all know that, thanks

what about the turning?

widths are 8 inches

2 four bolt pattern 4x4.5" or 4x114.3mm mags
front to center about 55mm/2.2", Center about 1.8mm/.75", back to center 80mm/3.2"; total abount 6" wide
used for 13" 70 series tires(used AR70x13 tires)

2 four bolt pattern 4x4.5" or 4x114.3mm mags
front to center about 80mm/3.2", Center about 20mm/.8", back to center 80mm/3.2"; total abount 7" wide
used for 13" 60 series tires(used B60x13 tires)




updateed info,


what about turing, bumps, what about that?

[collegeboi]

so the widths are 7 inches and 6 inxhes,

been reseaching abut cant seem to find the stock width, that could give me an idea of how much it would stiock out.

also need info on mk2 flares to see the mods.

[MONSOON]

Aluminum rims are 5.5 wide. They may not stick out that much or at all. But you would have to watch the struts/ spring perches and inside fender walls to make sure they didnt rub. And even then they may rub while turning.

[collegeboi]

they are 6 and 7 inches wide, whats the best way to see if they rub?

should i turn the wheel while jacked up?

[Damkid]

they are 6 and 7 inches wide, whats the best way to see if they rub?

should i turn the wheel while jacked up?

you almost answered your own question, the best way to see if they'll rub is to bolt them on the car and look if they rub anywhere

[collegeboi]

yahhhh im getting better haha

[Mazda_Power]

I have a set of GTX wheels if you want to pay shipping to Hawaii.

[collegeboi]

nah i was gonna pik up 10 of em for 100. but idk, its like i want wide but do i need them.......

my rim qz are done for a while