Announcement

Collapse
No announcement yet.

will these fit

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • will these fit

    please tell me will these fit and if i need spacers


    Frankie

    fully custom 88 festy (project doomsday) Febuary in 2012 calander
    Blockspire: ken block replica aspire
    AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man

    http://www.facebook.com/#!/profile.p...00000110128487

  • #2
    For sure spacers. I needed them for 15X6 wheels. Those are 15X6.5.
    Chuck
    Life's a beach, then you marry one---- Shakespeare
    If money will fix it, it's not broken
    91 GL -Ol' Rusty
    93 GL - Lil Red
    91 L - Tweetystiva
    http://www.fuelly.com/car/ford/festi...tfordcat/54176
    http://www.fuelly.com/car/ford/festi...tfordcat/54596

    Comment


    • #3
      i sure wouldn't use the tires "they" reccomend. go 195/45's.....and that wheel is too wide. 15" wheels FTL!
      ---------------------------------------------------
      The Jester - Midwest Festiva Inc., Missouri Chapter
      ---------------------------------------------------
      BUILD'EM CHEAP, RUN'EM HARD, REPAIR'EM DAILY!


      Comment


      • #4
        .25" spacers is all you'll need to make them fit with the 195/45/15s . order some quality long lug bolts and carefuly mount the tires to you car as you won't ba able to use the hub lip to center the rim.
        Trees aren't kind to me...

        currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
        94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.

        Comment


        • #5
          well i have an aspire suspension will that effect anything? and if i buy these some .25 spacers 195/45/15 tires and some long lug nut bolts it should be no prob???
          Frankie

          fully custom 88 festy (project doomsday) Febuary in 2012 calander
          Blockspire: ken block replica aspire
          AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man

          http://www.facebook.com/#!/profile.p...00000110128487

          Comment


          • #6
            If you have an Aspire suspension, then the bolt pattern is wrong. They look like they have a dual bolt pattern. I'd call them and make sure that one of the patterns is 4x100mm
            Festiva: Because even my dog can build a Honda.
            ---------------------------------------------------------------------------

            '90 L. B8ME/Kia Rio 5 speed. Rio/Aspire suspension swap. :-D
            '81 Mustang. Inline 6, Automatic.
            '95 Eagle Summit Wagon. 4G64 Powered.

            Comment


            • #7
              no no i just have the suspension just shock and strut
              Frankie

              fully custom 88 festy (project doomsday) Febuary in 2012 calander
              Blockspire: ken block replica aspire
              AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man

              http://www.facebook.com/#!/profile.p...00000110128487

              Comment


              • #8
                I have a 15x6.5 +38 offset with 195/45-15s and I didn't need a spacer. They are about 1/8" from the rear suspension arm but in 1800 miles have never rubbed. The ones you are thinking about have a +35 offset which will take it out 3mm from where mine are but then you will be VERY close to the fender lip. The rear is the only place where you will have a problem. You shouldn't need any spacer,I didn't and mine will be closer than yours. BUT definitely don't use the tires they reccommend like everyone else has said.
                -Bryant

                Comment


                • #9
                  thanx gomes and everyone else
                  Frankie

                  fully custom 88 festy (project doomsday) Febuary in 2012 calander
                  Blockspire: ken block replica aspire
                  AdvancedDynamix: "If you put the same kind of effort into your engine that you put into the rest of the car, well... it'll be epic". thanks man

                  http://www.facebook.com/#!/profile.p...00000110128487

                  Comment

                  Working...
                  X