Anyone runnin 98-99 accent alloys on stock festiva?

[notyettoday]

Hello,

I'm looking to install some of the 10 spoke 13x5 alloy rims on my 89 festiva. Anyone done this? is modification necessary?

Thanks

[festivaWES]

the split 5 spoke's?? I always though they would look decent on a festiva

[notyettoday]

i agree, i'm just wondering if they'd fit, i'm an hvac and electrical ase tech but i dont know a whole lot about wheels or how to tell they'd fit on a car i cant bring w/me to check them out because it doesnt have good tires heh

[econoaddict]

Here's a couple of nice links to use to find wheel size/bolt patterns and tire size differences

Bolt Patterns

Tire size calculator

[notyettoday]

are there any sites that show hub hole diameter specs? thats my concern, as those lists just mean the bolts will go in, not necessarily that everything else will work.

[econoaddict]

are there any sites that show hub hole diameter specs? thats my concern, as those lists just mean the bolts will go in, not necessarily that everything else will work.

Actually if you look the first link does have the center bore measurements on most vehicles, however I missed that they don't list hyundia and the festiva on isn't listed either of course the ones we need.
A bit of searching I found www.hyundaiperformance.com/
and it seems the center bore on the accent is 54.1mm which they say is common on mazdas and fords.

So if you have the measurement from your wheels you can compare.

Might do a bit of reading/searching at the above link and see if i missed something.

[JPT]

The Festiva/Aspire hubs are also 54.1mm