Announcement

Collapse
No announcement yet.

15" wheels fitment

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 15" wheels fitment

    Ok, I have done some searching on here, and most everyone has 13-14" wheels (if not the original 12"). I have a chance to get 15" wheels, but I am not sure if there will be a rubbing issue. My festy is completely stock, so I am not sure if I would have to modify anything to get them to fit. They are a little dirty, but I think they will clean up nice. Thanks for any help you can give me!

    The normal is not always normal... MOST is not ALL... And any job can be hard if you don't have the right tools!!!

    My Fleet:
    89 L 4spd (Daily Driver(if it isn't broke down)) "Spanky"

  • #2
    There are many of us running 15's with no fitment issues.
    If you plan on lowering your car, you may need to roll your fenders.

    Depending on your rim width, you may need wheel spacers.
    Steve GT

    Comment


    • #3
      Thanks for the info. I guess this means I have a new set of rims!
      The normal is not always normal... MOST is not ALL... And any job can be hard if you don't have the right tools!!!

      My Fleet:
      89 L 4spd (Daily Driver(if it isn't broke down)) "Spanky"

      Comment


      • #4
        just make sure they are 4x114.3 or 4x4.5.
        looks like you already knew that though.
        Steve GT

        Comment


        • #5
          id do a aspire swap and run stock aspire rims haha or run tracer trio 14s they are aluminum just like them would fit a little better on the aspire swap thats what im doing

          Comment


          • #6
            These are the 4.5 spacing, so if I ever did do the aspire swap, I couldn't use these.
            The normal is not always normal... MOST is not ALL... And any job can be hard if you don't have the right tools!!!

            My Fleet:
            89 L 4spd (Daily Driver(if it isn't broke down)) "Spanky"

            Comment


            • #7
              correct.....those accord wheels will look good tho....
              -Greg
              Euro-bprt...WORLDS FASTEST FESTIVA !!! 11.78@115.9
              BP, G trans, Megasquirt/ 550cc inj. t3/t3 (tbird) Garrett, REAR TURBO!!!! AND AC!!!!
              Redneck Engineer
              FOTY - '09
              5x Festiva Madness Attendee...FM 3,4,5,6,8
              http://www.youtube.com/watch?v=LpCZ7...9Pwqw-oe8s2OYQ
              http://www.youtube.com/watch?v=vU_eX...9Pwqw-oe8s2OYQ

              Comment


              • #8
                On the 15" rim, what size tire would you need to get them below the strut tower body on the rear?

                Comment


                • #9
                  195/45r15

                  BPT, G5M-R, BP26 Exintake swap + Fidanza cam gear, NSRT4 FMIC + 2.5" piping, HKS SSQV BOV, Exedy clutch, 3" downpipe + 2" all the way back, Aspire brake swap, KYB GR-2 & FMS coil spring , FMS EURO body kit + Carbon fiber hood, Falcon RTX 15X6½ + Toyo proxes T1R 195/45R15

                  Comment


                  • #10
                    Maxtiva, on kyb gr2's? (sorry for the hijack)
                    Mon arme a moi, c'est un stylo.

                    Comment


                    • #11
                      Yes but just on front

                      BPT, G5M-R, BP26 Exintake swap + Fidanza cam gear, NSRT4 FMIC + 2.5" piping, HKS SSQV BOV, Exedy clutch, 3" downpipe + 2" all the way back, Aspire brake swap, KYB GR-2 & FMS coil spring , FMS EURO body kit + Carbon fiber hood, Falcon RTX 15X6½ + Toyo proxes T1R 195/45R15

                      Comment

                      Working...
                      X