Wheel setup

[olivertwist]

I have been looking to upgrade to a 13" steelie rim is there another ri i can install that i dont have to swap the rear end,

I need some rims that will fit stock on the hub patter with no modes any ideas will help .

[Christ]

Older 4 lug accord, geo metro, mustang 4 lug, several others. Google the bolt papattern, chances are someone has a list of cars with that o pattern so you can match them.

[navdoc101]

Mazda 323.

[JPT]

Mazda 323.

x2

I just picked up a set. They fit perfectly.

navdoc101, what center caps are those?

[georgeb]

Mazda 323.

They have to be older than 1990.

[lessersivad]

Older 4 lug accord, geo metro, mustang 4 lug, several others. Google the bolt papattern, chances are someone has a list of cars with that o pattern so you can match them.

As far as I know, only the the 1960's/ early '70's Mustangs, NOT the fox bodies or the Mustang II.

To the O.P.'

try this link;


http://www.roadkillcustoms.com/hot-r...5&StudSpreadMM=

Hope this helps.

[navdoc101]

The center caps were on the 323. They fit very, very tight, bumped them on with a rubber mallet.

[Christ]

As far as I know, only the the 1960's/ early '70's Mustangs, NOT the fox bodies or the Mustang II.

To the O.P.'

try this link;


http://www.roadkillcustoms.com/hot-r...5&StudSpreadMM=

Hope this helps.

Fox 4 lugs were 4x114.3mm (4.5"), same as.early accord and several others.

They would have adiff offset and back spacing bc theyre RWD wheels.

[Advancedynamix]

1991 Dodge- Colt Vista 13 x 5 (15 slots)
1992-91 Eagle- Summit 13 x 5 (15 slots)
1999-90 Hyundai- Accent/Excel/Pony
1994-92 Hyundai- Excel 13 x 5
1989-81 Mazda- 323
1985-84 Mazda- RX7
1986-82 Nissan- Sentra
1990-78 Nissan- B310/Pulsar

[lessersivad]

Fox 4 lugs were 4x114.3mm (4.5"), same as.early accord and several others.

They would have adiff offset and back spacing bc theyre RWD wheels.

I'm not trying to start an argument but the '79-'93 Fox Mustangs had a 4 X 108mm
4 X 4.25" bolt pattern according to this;

http://www.roadkillcustoms.com/hot-rods-rat-rods/Wheel-Bolt-Pattern-Cross-Reference-Database.asp?Makes=Ford&Models=MUSTANG

Which is the same as the Mustang II and Pinto.

http://www.roadkillcustoms.com/hot-rods-rat-rods/Wheel-Bolt-Pattern-Cross-Reference-Database.asp?Makes=Ford&Models=MUSTANG+II

So the Fox Mustang wheels will neither fit the Festiva or Aspire hubs.

I KNOW for sure the early '60's Falcon wheels fit

[Bert]

Geo Metro, Pontiac Firefly and Suzuki Swift (all the same car) 1990s manufacture wheels are perfect and these 1 and 1.3 litre cars were particularly prone to subframe and brake line corrosion (up this way anyway) so there are none on the roads anymore. But they have 13 inch rims.

[Christ]

I'm not trying to start an argument but the '79-'93 Fox Mustangs had a 4 X 108mm
4 X 4.25" bolt pattern according to this;

http://www.roadkillcustoms.com/hot-rods-rat-rods/Wheel-Bolt-Pattern-Cross-Reference-Database.asp?Makes=Ford&Models=MUSTANG

Which is the same as the Mustang II and Pinto.

http://www.roadkillcustoms.com/hot-rods-rat-rods/Wheel-Bolt-Pattern-Cross-Reference-Database.asp?Makes=Ford&Models=MUSTANG+II

So the Fox Mustang wheels will neither fit the Festiva or Aspire hubs.

I KNOW for sure the early '60's Falcon wheels fit

You're absolutely correct. I'm not sure what made me think of them.

[NicholasJackson]

AU festiva