would these work on a festiva?

[RhodeStiva]

http://www.ebay.com/itm/Aero-Race-Wheels-30-Series-Black-Powdercoat-Roll-Formed-Wheel-13-x8-4x4-5-BC-/370678599739?hash=item564e2a903b&item=370678599739&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr

[RhodeStiva]

http://www.ebay.com/itm/Aero-Race-Wheels-31-Series-AEROBrite-Blue-Chrome-Spun-Formed-Wheel-13-x8-4x4-5-/370678659548?_trkparms=algo=LVI&itu=UCI&otn=3&po=LVI&ps=63&clkid=3433295445727155620&_trksid=p4506.m7&item=370678659548&vxp=mtr

im really liking these

[TheresGabe]

Those look VERY similar to the ones that Bustiva runs. I'm pretty sure it will all come down to the offset.

[92festie]

you wouldnt have to roll the fenders?!

[BUSTIVA]

Those are -64 offset that would make them stick out about 8 feet...

[RhodeStiva]

would these work on a festiva?

Bustiva you know more about these ones. What offset should I get for these ? They are a little wider than ordinary 13"

[william]

If you get the 13x7's the best off set available that i could find is 0 offset witch is 4inch back spacing.
and would still stick out a lot

[RhodeStiva]

would these work on a festiva?

I might start the stick out look up again

[Advancedynamix]

With an aspire brake swap, the lowest offset wheel in a 13x7 that will fit inside the fenders ( with rolling and stretching) is 25mm offset. This also requires about -3 degrees camber.

[BUSTIVA]

Research offsets, tire sizes, fender rolling, camber settings etc before you slap something in...if you do, you're gonna have a bad time.