Announcement

Collapse
No announcement yet.

air shocks on rear

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • bobbyspider
    replied
    Originally posted by Pu241 View Post
    Need something on the front to be able to raise and lower the vehicle and keep it level.
    yea I hope someone matches up some fronts as well.
    Last edited by bobbyspider; 08-28-2013, 09:12 PM.

    Leave a comment:


  • 1chrisapple
    replied
    also has a different lower bracket hopefully figure that out as well.
    Last edited by 1chrisapple; 08-28-2013, 08:26 PM.

    Leave a comment:


  • 1chrisapple
    replied
    turns out I also need air lines as these 822's didn't come with them like the others did. so will get the line kit tomorrow part# http://www.oreillyauto.com/site/c/se...p?keyword=ak29

    by the way the shocks are just as cheap through your local oriellys.by the time u pay shipping

    Leave a comment:


  • Pu241
    replied
    Need something on the front to be able to raise and lower the vehicle and keep it level.
    Last edited by Pu241; 08-28-2013, 08:15 PM.

    Leave a comment:


  • kingstonpygmies
    replied
    Yeah. Alot of upgrades and benefits out of a simple swap. Can't believe I never thought of this before. They are on eBay right now less than 80 shipped. Plus they would be bad with a remote valve hidden away

    Sent from Kingston Ga from my hillbilly handheld
    Last edited by kingstonpygmies; 08-28-2013, 07:38 PM.

    Leave a comment:


  • Pu241
    replied
    If the MA-822 can be made to fit, we might also have the ability to use these for an aero mod for increased MPG via lowering the vehicle.
    Last edited by Pu241; 08-28-2013, 08:14 PM.

    Leave a comment:


  • Flyin4stroke
    replied
    air shocks on rear

    Sounds sweet.
    Last edited by Flyin4stroke; 08-28-2013, 06:52 PM.

    Leave a comment:


  • FestYboy
    replied
    don't cut the beam open, just cut away the strut mount untill there's just the bolt left then cut that in half and pumch the pieces out. a small open ended wrench can easily hold a new nut for re-assembly.

    Leave a comment:


  • 1chrisapple
    replied
    They had the ma822 shocks in stock so im going to get one on tonight.just to c what cornering diffeerences are and then put other on tomorrow as i have to cut the beam open.one lower strut bolt just spins.gots to hold the nut

    Leave a comment:


  • Spike
    replied
    PICS NOAW.

    Leave a comment:


  • kingstonpygmies
    replied
    Definately need pics. Very interesting. Also need a report on how it rides.

    Sent from Kingston Ga from my hillbilly handheld

    Leave a comment:


  • zoom zoom
    replied
    Pics man we need pics!!!!!!!

    Leave a comment:


  • 1chrisapple
    replied
    so I got the ma820 shocks opened them and find out that both ends have {eyes}. the top doesn't have a stud so mre searching I come up with ma822. it can actually go lower than stock and can raise up 1.5 inches more than stock. they also have over 9 inches of travel.

    Leave a comment:


  • 1chrisapple
    replied
    gotta get correct length ones from parts house Tuesday then im gonna post it up.with pix

    Leave a comment:


  • Spike
    replied
    NOAW. PICS NOAW.

    And full instructions.

    Leave a comment:

Working...
X