205/50 r15

[bhearts]

What would it take to fit these on a Rio swap with Rio suspension.

[fuddrucker]

All I did to fit my 195/50 15s was the aspire front and rear swap and they bolted straighted on.

I'll presume they are 4x100?

[Team Lightning]

bhearts, it depends on the wheels and the offset. You may need spacers. you may need to roll the fender edge, you may need both. With an aspire swap and 195-50's and 15x6.5 wheels on my 93, I needed spacers on the back. The fenders are flared so no issues on the lip.

[MiltonHavoc]

I was gonna ask about this. I saw the guy on the FBpage. He had 15x7 and +32 or so. I just cant find what spacers he had. he was runnimg flares as well

[Team Lightning]

I believe that mine are either 5mm or 1/4". Don't recall which it says on the spacer.

[bhearts]

What material are spacers made from. Because true diy fashion would make me want to make my own. I have access to 1/4 inch plate aluminum.

[Team Lightning]

They were aluminum. Autozone has them.

[bhearts]

And they allow for hub centering wheels? I read that was an issue

[Team Lightning]

You would need the rings if the hole in the center is too large.