14x6 +25 offset Will they work?

[Eaglefreek]

I've tried searching for a half hour or so and I couldn't exactly answer my question. I bought what I thought were Isuzu Impulse wheels which online all I could find was the offset listed as high without a number. However, when I got them home and took a look at them, they have 25 on them and based on the backpacing and using a backspace to offset calculator, they are +25. I'm doing an Aspire brake swap with the Festiva struts at stock height and plan on installing 155/65/14's and I think I'll have fender clearance issues. Plus I don't want it to look like a roller skate. Any insight on this?
(Pic from the web, but same wheels)

[Advancedynamix]

You may want some negative camber to get them into the fenders, but they should fit. I'm refinishing a set of 14x7 O.Z. Turbine wheels that are eT25 and they fit fine with 165/55-14 tires. I've got over 3 degrees negative camber on all 4 corners though. You won't need nearly that much. Probably 1.5 degrees negative will work, and improve your cars stability.

[Eaglefreek]

You may want some negative camber to get them into the fenders, but they should fit. I'm refinishing a set of 14x7 O.Z. Turbine wheels that are eT25 and they fit fine with 165/55-14 tires. I've got over 3 degrees negative camber on all 4 corners though. You won't need nearly that much. Probably 1.5 degrees negative will work, and improve your cars stability.

Cool, thanks. I'll give them a shot.