Tweet
where can i find longer studs for my rims?
-
1993 B6T swapped Festiva- Reich raceing ECU, Cork Sport down pipe, MBC for now, Capri Tranny. sold
1993 BBF 466cid mustang notch 7.7 ltre
festiva turbo b18 project
2001 BMW 325i
1996 ford F-150 sold -
BP Festiva http://www.cardomain.com/ride/723319 - SOLD
BPT Festiva www.cardomain.com/ride/2260009 - SOLD
BPT GTX www.cardomain.com/ride/2436495 - SOLD
New GTX - http://www.cardomain.com/ride/3294846/ - SOLD -
got mine from a friend of mines shop, he measured the threads and how long i needed them to be and ordered them
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?Comment
-
ok thanks for the sites now one more question how long are the stock festy studs? ill be getting 1/4 inch spaces as well.. so would i need the 1.75?1993 B6T swapped Festiva- Reich raceing ECU, Cork Sport down pipe, MBC for now, Capri Tranny. sold
1993 BBF 466cid mustang notch 7.7 ltre
festiva turbo b18 project
2001 BMW 325i
1996 ford F-150 soldComment
-
I think I got the 2.25" for mine and cut them down a bit.
BP Festiva http://www.cardomain.com/ride/723319 - SOLD
BPT Festiva www.cardomain.com/ride/2260009 - SOLD
BPT GTX www.cardomain.com/ride/2436495 - SOLD
New GTX - http://www.cardomain.com/ride/3294846/ - SOLDComment
-
get the 50 mm studs (approx 1.9 inches), and get the open ended lug nutsComment
-
GordidaChalupaFestiva
now are those a direct stock bolt in fit for the festiva? if so thats not a bad idea ill prob end up getting them.. also i was wrong on my spacer i will need a 1/2 inch spacing for my 8.5 inch slicks .. will this be enough room if i space them out with these studs? since they are 1.9 inches long? also are these 1.9 icnhes of thread? or is it 1.9 inches total?1993 B6T swapped Festiva- Reich raceing ECU, Cork Sport down pipe, MBC for now, Capri Tranny. sold
1993 BBF 466cid mustang notch 7.7 ltre
festiva turbo b18 project
2001 BMW 325i
1996 ford F-150 soldComment
-
Im the one who shared that site. I currently have them on 2 festysOriginally posted by GordidaChalupaFestiva
It's a good thing you don't read the stickies, you might of learned something.
Poverty produces creativityComment
-
so will these work with 1/2 inch spacers
\1993 B6T swapped Festiva- Reich raceing ECU, Cork Sport down pipe, MBC for now, Capri Tranny. sold
1993 BBF 466cid mustang notch 7.7 ltre
festiva turbo b18 project
2001 BMW 325i
1996 ford F-150 soldComment
-
I would think so I got 8mm spacers, anyone know the conversion for mm to in? IIRC like 23mm per in, so that would be 1/3 in.It's a good thing you don't read the stickies, you might of learned something.Poverty produces creativityComment
-
25.4mm per inch
1/2" is just over 12mm~Jeff
1988 Festiva LX Silver 5speed. 219,000 miles. My new daily driver.
1988 Festiva L Plus Red 2brl 4speed. 504,477 miles and holding till I get the speed-o fixed.
2003 Mustang GT 5speedComment
-
sorry props to muscle_Car1 i had the same question and he got me the site. total was like 57 dollars for the lug set so thanks to muscle_Car1..Comment
Comment