FRONT ROTOR: Aspire Rotor Specifications

[Rich Norman]

From MVMA Spec Sheet:

Outer working diameter : 9.25" ( 235mm )

Inner working diameter : 5.55" ( 141mm )

Thickness ( new ) :
MTX- 0.71" ( 18mm )
ATX- 0.86" ( 22mm )

Material : Cast Iron

Type: Vented

3/04/02

[Whittey]

Some additions from the Ford CD:

front Disc Brake Rotor Thickness
ATX: 20mm - 22mm
MTX: 16mm - 18mm

Runout: 0.1mm
Scoring: 0.22mm

Machining limit
ATX: 20.762mm
MTX: 16.762mm

Rotor thickness must not vary more than 0.025mm.


-=Whittey=-

[festscort]

so is the main thing when getting rotors is to get matching pad as well because of the thickness's cause I'm sure my donor was auto but the new auto rotors I put on were super tight on the pads.