bobbyspiders bp/g-series project thread and all q's?

[bobbyspider]

^ hope that helps ya.

what size bolts did you use on the half-shaft? did you drill out the threads? what are the measurments you used to weld it where the holes are and what did you use as a refference for the measurments? -looks great! i think ill buy those spacers from ya

[freshtiva]

Subscribed

[eurotiva]

what size bolts did you use on the half-shaft? did you drill out the threads? what are the measurments you used to weld it where the holes are and what did you use as a refference for the measurments? -looks great! i think ill buy those spacers from ya

I used the stock bolts from the int. shaft. I drilled a hole inline with where it needed to be on the one closest to the trans. Second I ground a flat spot to expose the holes closest to the passenger side. I then used nuts that were large enough for the bolts to slide thru and welded them on.

I even bolted the shaft to the motor and held the nuts in place with the bolts and tacked everything together. Then removed and finished welding it. Both motor and trans were hanging from a hoist.

[bobbyspider]

having a major issue with the swap! the tranny seems to possibly be a different one then the stock egt one. it doesnt fit at all... at all its on the crossmember and i dropped it like maxtiva said and he is the one who made me the mounts so they shuld be rite. the front bottom mount is way to high on the trans. the top mount sits about 2 inches to far to the passenger side, the bottom mount gets in the way of the slave cylinder so i removed it. i thought i wouldnt have to bash the frame any but id have to take 2 inches out of the frame to get it to fit on the top motor mount. i just dont understand whats up... were theyer any other trannys that the egt guys swapped that are bigger? any input is appreciated -thanks

[big_ty2003]

I think a Toyota one

[bobbyspider]

what kind of toyota trans could it be?

[GenevaDirt]

what kind of toyota trans could it be?

ummmm....one that goes into a toyota....










I am sorry...I will shut up now

[Pu241]

Just a thought, but considering this your project shouldn't you have a few pics.
I can guarantee someone here can confirm the tranny's ID if you post some pics.

[bobbyspider]

Just a thought, but considering this your project shouldn't you have a few pics.
I can guarantee someone here can confirm the tranny's ID if you post some pics.

yea your rite ill get some in here tonight

[bobbyspider]

ummmm....one that goes into a toyota....










I am sorry...I will shut up now

ha ha i guess they only made one kind?

[big_ty2003]

1995-1997 Kia sophia trans
Toyota E153 Tranny from a mid-90s (or later) Camry or Solara V6 with the 1MZFE engine

[eurotiva]

Post pics of those mounts too. It will help us to understand.

[bobbyspider]

sorry guys ill get some pics up today i didnt have a camera last night and im doing the swap at a friends house.

[Maxtiva]

Here are the pic from the mounts I made for Bobbyspider. They did fit on my BPT+G5M-R

[bobbyspider]

yea i took some pics last night ill post them later today. i dont think the mounts are wrong i just need help knowing what to do to drop the motor fully so the mounts line up. also it needs to go like two inches toward the drivers side for mount to match up with the factory hole on the frame. sorry guys about the lack of pics and info, its been crazy buisy im getting married in oct so all the planning and finding an apt and... plus i break and we have a huge show in august my crew and i are getting ready for. trying to button up a few other things before oct. -thanks for your patience guys