Announcement

Collapse
No announcement yet.

sasquatch's tracker build.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • sasquatch's tracker build.

    from when i got it...



    and ill update in this thread from now on...

    a few new things i have dont other than fill it up with gas and change the oil are:

    painted the rims with truck bed liner


    put in the cold air intake out of my festiva


    installed a hula girl on the dash


    and fixed all the rust in the back... WOW, there was WAY more than i thought when i bought the thing... (the green N"s are spare ones if someone steals mine off the back of the car... its to let other people know that im a new/noob driver... stupid canadian laws...)



    i know its not the proper way to fix rust but it works just fine and it was cheap the silicone is just to seal it up, i welded the sheets of metal down good... ill later be sticking boat carpet in the back to stop some sound and if it gets wet it wont mold as fast lol...

    and you can see the new speakers in the back too... i took some 1/2 inch MDF and cut that out and coverd it with some speaker box fabric to make it look nice... the carpet im puting in the back should be the same color or close... they sound much better than the factory stuff

    not to sure what ill do to it next... im thinking of putting some 6.5"s in the doors... i also need to fix the shocks and brakes and i think im gonna get a 2 inch coil lift and maybe get some 31"s tires i still have to install the lights on the roof and back up lights cause the factory ones are junk...

    anyways...

    stay tuned


    Mike, AKA the sasquatch
    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

  • #2
    Awesome project!!! my dad has owned like 6 trackers and when i first got my learners i drove them, i hated them SOOOOOOOOOO much but can now appreciate them.

    -GL!

    Comment


    • #3
      I've seen tracker's at local "mud runs" and they go through anything even in stock form :thumbright:

      1988 323 Station Wagon - KLG4 swapped
      1988 323 GT - B6T Powered
      2008 Ford Escape - Rollover Survivor

      1990 Festiva - First Ever Completed KLZE swap (SOLD)

      If no one from the future stops you from doing it, how bad of a decision can it really be?

      Comment


      • #4
        Nice job we has a suzuki samurai that we went mudding it that was a bunch of fun

        heres me pulling it out of the mud hole lol
        Last edited by M3NTAL; 07-10-2011, 11:45 AM.
        -M3NTAL MARK! Woo!!

        Comment


        • #5
          I always wanted a tracker or samurai with 31's. Shoot you should see how they patched rust holes in my mustang. Tared one in, screwed one in and the other 2 were riveted in. All were just placed over the rust.

          Comment


          • #6
            I want a 4-door tracker. I'd love to put a 2.0 Ecotec into one. That's all it'd ever need... My sister had one for about 15 minutes... It's in a yard now... *sigh*
            In love with a MadScientist!:thumbright:
            There's a fine line between breathtaking ingenuity and "That's the stupidest thing I've ever seen!"

            Comment


            • #7
              nice ride! There is a guy on ls1tech that put an ls1 in his, just about the sweetest thing I have ever seen, ha ha
              93 Probe GT-Twincharged-11.992@115mph 10lbs
              -11.940@111.66mph 14lbs(Slipping clutch)
              123.7mph highest trap
              95 Probe GT-RWD-4.8LS-Turbo in process-10.240@135.3mph, Turboed, 3300 race weight

              Comment


              • #8
                My buddy has a samurai on 38's the guy down the street from him just took his ls1 out of his samurai on 38's he could never get the drive train finished so he is going back to stock motor. I'll get some pics in the morning.
                1988 Ford Festiva "Sonic" BPT g25mr MS2 standalone ecu, FOTY '11, Best Beater FMV, Fan Favorite FMVI

                1989 Ford Mustang GT 5.slow

                1996 Ford F-150

                Comment


                • #9
                  Maybe instead of boat carpet you could just spray bed liner in there. That should help stop sound and is much easier to clean! I have some out door speakers that I used to use on my boat. That can be hosed and work fine! Then you could just spray out your car after mudding!

                  Loving it so far though it looks great!
                  -------------------------------------------------------------------------------------------
                  Nancy- 1.8L BP, aspire swap, g-trans
                  The Adventures of Nancy! Build Thread
                  -------------------------------------------------------------------------------------------

                  My Musica! Click me!

                  Comment


                  • #10
                    With a/c.
                    1988 Ford Festiva "Sonic" BPT g25mr MS2 standalone ecu, FOTY '11, Best Beater FMV, Fan Favorite FMVI

                    1989 Ford Mustang GT 5.slow

                    1996 Ford F-150

                    Comment


                    • #11
                      Originally posted by Flyin4stroke View Post
                      With a/c.
                      That's hideous! Give it to me so no one else can see it! Hahaha
                      In love with a MadScientist!:thumbright:
                      There's a fine line between breathtaking ingenuity and "That's the stupidest thing I've ever seen!"

                      Comment


                      • #12
                        I wished I had picks of the ls1 one the guy had. It has an after market hood with holes and a scoop its nasty.
                        1988 Ford Festiva "Sonic" BPT g25mr MS2 standalone ecu, FOTY '11, Best Beater FMV, Fan Favorite FMVI

                        1989 Ford Mustang GT 5.slow

                        1996 Ford F-150

                        Comment


                        • #13
                          Originally posted by Flyin4stroke View Post
                          With a/c.
                          What you meant to say was "With a/c, blah blah."
                          90 Festy (Larry)--B6M (Matt D. modified B6 head), header, 5-speed, Capri XR2 front brakes, many other little mods
                          09 Kia Rondo--a Festy on steroids!

                          You can avoid reality, but you can't avoid the consequences of avoiding reality--Ayn Rand

                          Disaster preparedness

                          Tragedy and Hope.....Infowars.com.....The Drudge Report.....Founding Fathers.info

                          Think for yourself.....question all authority.....re-evaluate everything you think you know. Red-pill yourself!

                          Comment


                          • #14
                            ^^ hahaha awesome. It's just like greg too, like you need a/c in the mud hole or at the track. We have to redo the front axle from a jump a couple weeks ago. Aired it out and bent the front axle. I keep trying to convince him to do a turbo swap but he is reluctant because turbos don't like sand.
                            1988 Ford Festiva "Sonic" BPT g25mr MS2 standalone ecu, FOTY '11, Best Beater FMV, Fan Favorite FMVI

                            1989 Ford Mustang GT 5.slow

                            1996 Ford F-150

                            Comment

                            Working...
                            X