Alice and The Festicle

[Sid_RallyX_82]

Just ordered 50^2ft of Kilmat from Amazon. Just under $60

[Sid_RallyX_82]

Shifter Brace Trans Bushing
Kia Part# 0B092 46041

[Sid_RallyX_82]

Shoulder Bolt Shifter Joint

[Sid_RallyX_82]

Shifter Bushing Repair

[Sid_RallyX_82]

Civic/Integra Short Shifter Thread

[Sid_RallyX_82]

So I can find later

[Sid_RallyX_82]

B3T build threads:

https://fordfestiva.com/forums/showthread.php?29547-Jesse-s-turbo-B3-Build/page7&highlight=Welded+turbo

https://fordfestiva.com/forums/showthread.php?41700-Fastest-B3-Record&highlight=Bustiva

https://fordfestiva.com/forums/showthread.php?47287-B3-T-swap-(My-parts-arrived)&highlight=B3+turbo+oil+lines

[firebush357]

I have only tried one brand which were the cheapest I could find on Ebay and they are still working over a year later.

[Sid_RallyX_82]

Aside from pulling a factory strut mount from a scrap car at the yard, would you guys recommend any particular brand or is This Cheapy from O'reilly good enough?

[Sid_RallyX_82]

So I can find later:
2001 Rio Strut Mounts

[Sid_RallyX_82]

The Festicle, Officially renamed "Aurora"

[Sid_RallyX_82]

I don't think a tool like that will go very neatly through all the ridges and valleys... so I'll keep looking for another method.
I like the simplicity of dumping the factory crap and starting over.

[bravekozak]

I got rid of all the stock vapor barriers.
I used Cosella-Dorken vapor barrier.
It's sexy + it reflects cold or heat inward.
I just ran a bead of removable draft sealant around the perimeter and stuck it on.

I did an entire room on top of a garage with this stuff.
Before I put the blueboard on, it felt like stepping inside a flying saucer.

[ryanprins13]

Oh, like an oscillating blade or something?

Yes. I saw an advertisement a long time ago where they were removing tiles with one. I think its this.

Does anyone know if there is a place to buy a new rubber guide that goes around the roll up windows?

Fourgreen iirc. Thats where i plan to try to order mine from.

What's up with this clear(ish) plastic piece on the door pillar? Is it just supposed to block air flow or something?[ATTACH=CONFIG]21596[/ATTACH]

Airflow, but mostly dust. I just used vapor barrier and tuc tape. i just used foil tape over smaller holes.


Sent from my SM-G920W8 using Tapatalk

[Sid_RallyX_82]

What's up with this clear(ish) plastic piece on the door pillar? Is it just supposed to block air flow or something?image.jpg