I'm going to dyno my car tomorrow in order to sort out my methanol issue........any bets on what it will put down!?
Announcement
Collapse
No announcement yet.
Going to the dyno tomorrow
Collapse
X
-
300 +
But if I have to be more specific, I'd say............342hp 325ft/lbs.-Greg
Euro-bprt...WORLDS FASTEST FESTIVA !!! 11.78@115.9
BP, G trans, Megasquirt/ 550cc inj. t3/t3 (tbird) Garrett, REAR TURBO!!!! AND AC!!!!
Redneck Engineer
FOTY - '09
5x Festiva Madness Attendee...FM 3,4,5,6,8
http://www.youtube.com/watch?v=LpCZ7...9Pwqw-oe8s2OYQ
http://www.youtube.com/watch?v=vU_eX...9Pwqw-oe8s2OYQ
-
im guessing 312hp and 295ft/lbs... if you read this before you go to the dyno call or text me if you dont mind me comming out and watching... i would love to come out and see it
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...
Comment
-
i'd love to see it reach more then 304 whp, thats the current HP record i've seen in a festiva!!
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
-
that sucks how much power did it make before it blew up?
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...
Comment
-
Sounds like your not having much luck this year
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
-
Put a pump in it today and it started to rain just as I finished....no racing!!!!!!
It put down 275 and 260 ft\lbs on a mustang dyno at 20psi......made significantly more power under the curve after just 6 pulls.
I had boost control issues that I couldnt see on the street or at the track.....that explains my trouble at the track!!!! It makes 20psi at 3800rpm now as opposed to 10 at 3500 and gradually gaining to 20psi at 7200rpm.
Looking forward to the next track day.
Comment
-
Originally posted by grocerygetter View PostPut a pump in it today and it started to rain just as I finished....no racing!!!!!!
It put down 275 and 260 ft\lbs on a mustang dyno at 20psi......made significantly more power under the curve after just 6 pulls.
I had boost control issues that I couldnt see on the street or at the track.....that explains my trouble at the track!!!! It makes 20psi at 3800rpm now as opposed to 10 at 3500 and gradually gaining to 20psi at 7200rpm.
Looking forward to the next track day.
Comment
-
Very nice numbers!! :thumbright: i can't wait to see the next track day results!!
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
-
ya that sucks that it rained today i think im gonna try and get my exhaust done and try it at the track again, i want to make the top 20 list so bad and all i need is a 15.4 1/4 and last time with a junk launch i made 15.8 so im not that far off
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...
Comment
-
good numbers.
r u still on stock reprogramed ecm?
Comment
-
Nice we have some nice festivas in california..i remember when i was the only one with one.i talked to my friend today and i offered him a 94 j30 plus some cash for mextiva he said he would prob do it..so hopefully i will get it back soon.if not i have to pay for it,but still getting it one way or another.
Comment
Comment