Announcement

Collapse
No announcement yet.

all is well with the ford gt

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • all is well with the ford gt

    escort gt lol... i finaly got it going

    i had it apart in 1hour and 45min last time... that is down to the pistons in 1.75 hours :shock: 8) and back in one pice in 4 hours :shock: 8) :lol:

    the compression is betwen 13.5 and 11.2 bar :shock: 8)
    i decked the head, i think 20 thou, new valves and guides, head gasket, piston rings and other stuff,(basic rebuild) also i got a cheap $12 air filter from princess auto to help sell the car and it work good
    it purrs like a very loud kitten (exhaust leak)
    other than the noise it is a kick butt car... i approve :thumbright:
    hopefully ill take it to the free dyno day at BD and see how much power i can make :twisted:


    Mike, AKA the sasquatch
    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

  • #2
    You got me... ugh... Was hoping to see the $150,000 car on here... LOL...
    I know this guy named "Joe" that has one with 1450 Rwhp... (or at least that was the last time I knew of it).. he had right around 1000 Rwhp.. but lost racing to a Turboed Busa.. and vowed never to lose again... thus the extra 450 rwhp..

    Comment


    • #3
      ^^ Is Joe the guy that has the one in the IMG video? If so that is one BAD car!
      Brian
      http://www.cardomain.com/ride/2274977



      93 GL modyfied!!!
      :fish:

      Comment


      • #4
        gttt, that is what i want 8)


        Mike, AKA the sasquatch
        1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

        Comment


        • #5
          yes it is..

          Comment

          Working...
          X