What to look for in a project platform Festiva / 323? And other questions

[freshtiva]

Welcome to the board. I just finished a B6 swap in my 93GL. Easy, easy easy. Wire the B6 injectors into the Festiva harness, install the B3 dist. in the B6, and use the Festiva flywheel, pressure plate, disc, and throw-out bearing. Don't forget to install the 323 ECM, it's a direct plug-in, and you're done.

Hotfordcat you must have installed the pre 1990 b6 ?? The post 1990 needs no injector harness rewireing and the 323 disty works great. Might want to use the b6 VAF along with the b6 ECU, so I learned.

Dreamweasel; if you were leaning towards a 323 or festiva project the b6 swap includes both. Welcome to the site and good luck !!

[eurotiva]

Welcome. I did the B8 swap out of a 91 protege dx. No rewiring. Only had to make the exhaust meet up. Turboed it and it ran 14.3 @ 96mph. Easy swap. B8 by the way. 103hp/113ft. lbs.