Announcement

Collapse
No announcement yet.

weber adapter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • weber adapter

    In process of swapping in one of those cheap low mile Japanese B6 into my Festiva. Been aiming to go to weber carb anyway, figure easier to do it before putting engine into car. Not lot room in Festiva engine compartment unless you are a double jointed midget.

    anyway rather than reinvent the wheel so to speak thought I would first do search for adapter plate. There is a Mazda 323 plate on USA ebay but its not correct bolt pattern for manifold I have. On mine the bolts for the OEM carb are same spacing as weber front to back, they just arent spaced correctly side to side. Further search found whole weber carb kit on Australia ebay for some crazy price but it has correct adapter. Not buying it (will just make my own) but thought some here might be interested in seeing it.



    Since its an ebay listing and could easily disappear thought bit more permenent to host couple of pics of it elsewhere.




  • #2
    where are you located? looks like a sweet setup!

    -"Hairlipstiva" 1991 GL 5spd (swapped from an auto), rolling on Enkei 14x6 +38 with 195/45/14 Toyo's, Jensen MP5720 CD deck, tach install, LED strip in cluster, down position rear wiper, FMS springs, Gabriel shocks on 4 corners, Acura Integra short shifter
    -Escort GT 91 donor car with BP, G5M-R tranny to be dropped in the little guy...
    -Aspire brake swap COMPLETE!
    https://www.wunderground.com/persona...?ID=KOKOWASS38

    Comment

    Working...
    X