Tweet
I picked up new tie rod ends today and they were greaseable!!!!!!!!
-
89SX funtop! Fully loaded!
RIP 90LX
-
hey stefan, I have a question. A long while back you had some grab handles for sale that screwed right in to the festy. What were they off of?
1993 Festiva L, aspire swapped, selling parts for a BP+T build. -
escort gt ones?
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
they are just a tiny bit longer... they still have the same thread pitch and what ever...
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
i got mine from rockauto earlier this year and yep - a grease zerk.
-"Hairlipstiva" 1991 GL 5spd (swapped from an auto), rolling on Enkei 14x6 +38 with 195/45/14 Toyo's, Jensen MP5720 CD deck, tach install, LED strip in cluster, down position rear wiper, FMS springs, Gabriel shocks on 4 corners, Acura Integra short shifter
-Escort GT 91 donor car with BP, G5M-R tranny to be dropped in the little guy...
-Aspire brake swap COMPLETE!
https://www.wunderground.com/persona...?ID=KOKOWASS38Comment
-
escort/aspire has a different taper than the festiva ones. Match the knuckle/rod ends.Originally posted by sasquatch View Post~Nate
the keeper of a wonderful lil car, Skeeter.
Current cars:
91L "Skeeter" 170k, Aspire brakes, G15, BP, Advancedynamics coil overs, etc. My first love.
1990 Kawasaki Ninja 250 - my gas saver, 60+mpg - 40k
2004 MotoGuzzi Breva - my "longer range" bike - 17k
FOTY 2008 winner!Comment
-
i got mine from oreiily and they had a grease fittingComment
-
oooo, thanks for the info... i didn't know that...Originally posted by skeeters_keeper View Post
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
ok my bad lol. I never head of greaseable ends, except for the EGT ones, but thats for the aspire swap.89SX funtop! Fully loaded!
RIP 90LX
Comment
Comment