Festiva Tinkerer Challenge

[Levitan]

For those of you guys that like to do things that haven't been done or just like to do things because, I have a challenge for you, and I will pay you for the completed challenge. I would like a pair of front corner lights, that the orange lens have been successfully removed. In other words, I need a pair of unbroken housings and a pair of unbroken lenses.
Maybe the way to accomplish the feat is to use 2 full sets, break the lens out so we have good housings from one set, then break the housing off the good set of lenses. It's up to you, but I need a set as described above.

Thanks,
Dan "Levitan"

[MTec007]

have you tried boiling a pair to loosen the bonding? then just carefully pry

[Levitan]

No I haven't. Have you tried it?

[MTec007]

no but its been done before. a guy i work with has a yukon and he boiled his to remove the orange plastic that sits behind the actual lens

reference: http://wallpapers-diq.org/wallpapers...Denali_SUV.jpg

i just would hate to see two pairs destroyed when (if?) it could be done without destroying any

edit; if you dont have an extra set i do have a set on the 'bay right now

[Evil D]

Acetone may also do the trick. R/C guys often use it to remove tires from rims that have been super glued on.

[FB71]

acetone won't work. They're sealed with hot melt urethane. boil'em

[Levitan]

acetone won't work. They're sealed with hot melt urethane. boil'em

Will Do!

[Levitan]

edit; if you dont have an extra set i do have a set on the 'bay right now

You ARE kidding right? I have 9 Festivas, a 40' long wall, 10' high, of shelves full of Festy parts, I might be able to find an extra set somewhere...LOL!!!!!! I just didn't know the solution to the problem. Now I will solve it.