VAF adapter.

[91_festy_Gl]

Does anyone know of a adapter thats fits the VAF on a BP? Im looking to finish my CAI but not sure what or where to find a adapter thats fits the VAF. I have tried Autozone and they didn't have anything that came close to fitting.

Thanks in advance.

[xaero_81]

Doesn't the Ebay Miata adapter fit?

[91_festy_Gl]

After some searching I found the RX-7 adapter. Is this the one used for the BP or just the stock festy VAF?

[91_festy_Gl]

Doesn't the Ebay Miata adapter fit?

Good idea man! I never though of that.

[sasquatch]

get a rx7 vaf and a rx7 adapter to fit it, gives you some extra hp

[91_festy_Gl]

get a rx7 vaf and a rx7 adapter to fit it, gives you some extra hp

Is there a certain year I need to look for?

[1988festivazoom]

if im not mistaken its the 3rd gen rx7 vaf??

[hofficergrover]

Advance auto parts sells them and they like 12 bucks or so.
I work at a advance i can get the part number so you can just tell them to order it if they don't have it in stock.

[91_festy_Gl]

Advance auto parts sells them and they like 12 bucks or so.
I work at a advance i can get the part number so you can just tell them to order it if they don't have it in stock.

That would be great bro!

[hofficergrover]

No prob will have it to night after work.

[hofficergrover]

The part number is 8148 and it is $5.99

[91_festy_Gl]

The part number is 8148 and it is $5.99

Thanks bro but its the wrong one. I just went and bought it and I didnt really notice that it was square insted of rectangular. My VAF is rectangular. Its made by spectre? The one I got is.

[Rocketman]

The adapters I manufacture should fit the BP VAF. I built it for the B6T VAF- but the two are very similar. Can you get me dimensions of the opening + the studs centers?

[hofficergrover]

Yes that is a spectra we have a catalog that has all this stuff in it. I didn't use that so i didn't know if it would work it was the closest thing to looking like it lol
You can get them on ebay cheap tho

[91_festy_Gl]

The adapters I manufacture should fit the BP VAF. I built it for the B6T VAF- but the two are very similar. Can you get me dimensions of the opening + the studs centers?

Once my step dad gets home I can get you a accurate measurement. I measured with a ruler 3 1/2" wide by 2 1/4"tall. thats the stud measurement. I can get better measurements here shortly on the studs and opening.