Tweet
In the next year or two, I want to rebuild two engines. The first will be mainly for practice and will be one of my B3s (unless I can get a later model B6 cheap enough). The goal on the first one is to just do it, and to concentrate on fit, balance, etc., keeping the costs down.
The second one will be the future "Speedstiva's" B6, which is planned to make between 100 and 110 hp or thereabouts, optomized for standard octane gas.
Here's one book I could buy:
Good choice? Any others I should get?
I've done an engine swap and now I need to move "inwards." I've taken off & reinstalled both manifolds, done most seals, but have never taken a head or an oil pan off a block.
Karl
The second one will be the future "Speedstiva's" B6, which is planned to make between 100 and 110 hp or thereabouts, optomized for standard octane gas.
Here's one book I could buy:
Good choice? Any others I should get?
I've done an engine swap and now I need to move "inwards." I've taken off & reinstalled both manifolds, done most seals, but have never taken a head or an oil pan off a block.
Karl