Hey guys. I have a 88 festiva. 4speed. I am making it into a circle track at to race at my local short track (asphalt). Everybody around here is doubting me because it's a festiva. I believe I should do pretty good with it. But I was jus gonna see if anyone had any suggestions to get more power?? ...but I have to stay to the 'rules'. I am supposed to be completely stock. The rules are on the website newkingsportspeedway.com (under pure 4 section of the rules). ...I was thinkn cam,header,bigger jets in the carb?? ...and if anybody knows where I can get a rollcage for my car then let me know. Thanks. ...if have any ?'s let me know. ...and my car has to weigh 21lbs per horsepower but if torque is greater then horsepower then has to weigh 28lbs per horsepower.
Announcement
Collapse
No announcement yet.
Circletiva ....all suggestions are welcome
Collapse
X
-
Circletiva ....all suggestions are welcome
88 track-tiva (in progress)
1968 chevelle 4spd 454 (mint)
1990 silverado lifted (purple truck)
1981 camaro (blew the motor now building another)
1989 ford f350 (Rebuild done!)
1986 bronco (the beater)
73 camaro (bumble bee)
2002 yammer hammer R6
96 silverado show truck -sold-
2004 silverado 2500hd
..........Tags: None
-
If you want to get more out of the carb, you need to change to a Weber carb, like the Weber 32/36 a few have done here (myself included) and will increase the power on the B3 a little, and a cam is good. You might be able to locate an FMS cam, here or on ebay.
FMS, stands for Festiva Motor Sports. There is a website, and can be found on ebay, too.
Advance the timing to 10-12 BTDC, and use premium fuel., and some Octane booster. Be sure engine does not "detonate" when advancing the timing. With the premium fuel, you can open the gap on the spark plugs, from .044 to .048, which helps with a hotter spark from the plugs to burn the fuel.
Of course, you COULD put in a B6, since they look exactly like a B3, and no one would probably notice.
Of course the Weber is NOT stock, eitherLast edited by drddan; 06-22-2012, 02:57 PM.Dan
Red 1988 Festiva L - CUJO
Black 1992 Festiva GL Sport - BLACK MAGIC
I'm just...a little slow... sometimes:withstupid:
R.I.P.
Blue 1972 Chevelle SS-468 C.I.D. B'nM TH400-4:56 posi-Black racing stripes-Black vinyl top-Black int.
Black on black 1976 Camaro LT-350 4 bolt main .060 over
Silver 1988 Festiva L
My Music!
http://www.reverbnation.com/main/sea...t_songs/266647
-
Yeh. If I can put a b6 in it and no one notices then I would like to do that. I'm not exactly wanting to cheat lol. But I don't know of one person that is runing totally stock up there. And I am really needing find a rollcage.88 track-tiva (in progress)
1968 chevelle 4spd 454 (mint)
1990 silverado lifted (purple truck)
1981 camaro (blew the motor now building another)
1989 ford f350 (Rebuild done!)
1986 bronco (the beater)
73 camaro (bumble bee)
2002 yammer hammer R6
96 silverado show truck -sold-
2004 silverado 2500hd
..........
Comment
-
ERK. That isnt short for Erkle is it? :p lol Just jokin'
What mods, if any, are allowed?
A suggestion: Put up your location in your profile/avatar, so we know about where you are. There may be peeps close to you that can help, but we wont know, without that tidbit of info.Last edited by drddan; 06-22-2012, 03:02 PM.Dan
Red 1988 Festiva L - CUJO
Black 1992 Festiva GL Sport - BLACK MAGIC
I'm just...a little slow... sometimes:withstupid:
R.I.P.
Blue 1972 Chevelle SS-468 C.I.D. B'nM TH400-4:56 posi-Black racing stripes-Black vinyl top-Black int.
Black on black 1976 Camaro LT-350 4 bolt main .060 over
Silver 1988 Festiva L
My Music!
http://www.reverbnation.com/main/sea...t_songs/266647
Comment
-
^^ if its like my dirt track you WILL have to cheat to compete I run a b6 with a weber carb conversion, in my hornet car, (dirt track) and i cant even touch them so called "stock" Saturn sc2 that are out there but the biggest problem for me is traction I think you would do better on asphalt.
Comment
-
Oh yeah... WELCOME TO THE SITE!Dan
Red 1988 Festiva L - CUJO
Black 1992 Festiva GL Sport - BLACK MAGIC
I'm just...a little slow... sometimes:withstupid:
R.I.P.
Blue 1972 Chevelle SS-468 C.I.D. B'nM TH400-4:56 posi-Black racing stripes-Black vinyl top-Black int.
Black on black 1976 Camaro LT-350 4 bolt main .060 over
Silver 1988 Festiva L
My Music!
http://www.reverbnation.com/main/sea...t_songs/266647
Comment
-
X2 on the b6 swap, you can use your existing manifolds on the first Gen and look totally stock. Honestly an aspire brake/susp swap would be in order too. You really can't tell the difference unless you know the cars, and it really cuts down the body roll. Fms cams work with the b6 as well. As far as roll cages go, get ready to fab one. I always liked the old adage "if you ain't cheatin' you ain't trying."
Sent from the bathroom via crapatalk.91 L 5sp "The Silver Bullet" B6, Brake/Susp Swapped Build Thread
92 L 5sp "Red" RIP
95 Grand Prix SE DD
Wife's Stuff:
89 L 5sp "Carby Car"
97 Aspire auto "Pink Panther" Build Thread
Spring 2013 IndyStiva:
http://www.fordfestiva.com/forums/sh...eet-April-20th
Comment
-
Thanks. Yeh I am new I haven't done my location or nthn yet. As Lon as it looks stock to the track officials it's fine with me. I'm jus no wantn to do it then not be able run lol. I have hobby class and a late model car but it's getting lil too expensive to run them. So I'm try just run the 4cylinder class with the tiva. ...and I am in Kingsport,tn. I will fid out how put in my profile.88 track-tiva (in progress)
1968 chevelle 4spd 454 (mint)
1990 silverado lifted (purple truck)
1981 camaro (blew the motor now building another)
1989 ford f350 (Rebuild done!)
1986 bronco (the beater)
73 camaro (bumble bee)
2002 yammer hammer R6
96 silverado show truck -sold-
2004 silverado 2500hd
..........
Comment
-
And yeh I figured the rollcage would be some own fabing. Jus hoping someone might have ha a kit that I didn't know about. I usually get mine through jrmotorsports but no luck so far.88 track-tiva (in progress)
1968 chevelle 4spd 454 (mint)
1990 silverado lifted (purple truck)
1981 camaro (blew the motor now building another)
1989 ford f350 (Rebuild done!)
1986 bronco (the beater)
73 camaro (bumble bee)
2002 yammer hammer R6
96 silverado show truck -sold-
2004 silverado 2500hd
..........
Comment
-
Oh. And ERK is for Eric. Lol.88 track-tiva (in progress)
1968 chevelle 4spd 454 (mint)
1990 silverado lifted (purple truck)
1981 camaro (blew the motor now building another)
1989 ford f350 (Rebuild done!)
1986 bronco (the beater)
73 camaro (bumble bee)
2002 yammer hammer R6
96 silverado show truck -sold-
2004 silverado 2500hd
..........
Comment
-
Sounds like you'll have to be running the 28Lbs/hp route. That would equate to 1736Lbs minimum (if you go by the factory 62hp rating). You should be able to meet that weight fairly easily. Running a stock 82hp B6 should make you competitve and look stock, unless they pump your cylinders for a displacement check.Last edited by blkfordsedan; 06-22-2012, 04:03 PM.Brian
93L - 5SP, FMS springs, 323 alloys, 1st gen B6, ported head & intake, FMS cam, ported exhaust manifold w/2-1/4" head pipe.
04 Mustang GT, 5SP, CAI, TFS plenum, 70mm TB, catted X, Pypes 304SS cat-back, Hurst Billet+ shifter, SCT/Bama tuned....4.10's & cams coming soon
62 Galaxie 2D sedan project- 428, 3x2V, 4SP, 3.89TLOC
1 wife, 2 kids, 9 dogs, 4 cats......
Not enough time or money for any of them
Comment
-
Yeh I was wondering if they would do a displacement check or how they would even check I I am stock since everyone is running just any 4cylinder car. I'm gna try to get a header/cam and beef up my carb and possibly the aspire suspension. And if they are beating me then it's a B6!88 track-tiva (in progress)
1968 chevelle 4spd 454 (mint)
1990 silverado lifted (purple truck)
1981 camaro (blew the motor now building another)
1989 ford f350 (Rebuild done!)
1986 bronco (the beater)
73 camaro (bumble bee)
2002 yammer hammer R6
96 silverado show truck -sold-
2004 silverado 2500hd
..........
Comment
-
The shoguns are stock. Lol. And I am allowed to run a rear wheel drive. Lol. But they say it has to be factory for that car. And the head has to match the block for what came on it. ....but I think I should be able to have a better HP to weight ratio. And if I can do a few things to get lil more power I should be able come out of the turns harder then everyone else. (hopefully)88 track-tiva (in progress)
1968 chevelle 4spd 454 (mint)
1990 silverado lifted (purple truck)
1981 camaro (blew the motor now building another)
1989 ford f350 (Rebuild done!)
1986 bronco (the beater)
73 camaro (bumble bee)
2002 yammer hammer R6
96 silverado show truck -sold-
2004 silverado 2500hd
..........
Comment
Comment