"...I don't believe our roofs would accomidate the extra weight without re-enforcement."
So, add reinforcement!
Four point roll bar with cross brace and a hitch plate welded onto the top. May have to cut into the roof to do this. Seal it up real nice to keep the weather out.
Definitely want to have a nice firm suspension too. Might make a good case for the Aspire stabilizer bar up front and the Aspire rear axle. Help control "sway." Lowering it an inch or so shouldn't hurt either.
Karl
'93GL "Prettystiva" ticking B3 and 5 speed, backup DD; full swaps in spring!
'91L "AquaMutt" my '91L; B6 swap/5 speed & Aspire brakes, DD/work car
'92L "Twinstiva" 5sp, salvage titled, waiting for repairs...
'93GL "Luxstiva," '94 B6 engine & ATX; needs overhauled
'89L "Muttstiva," now a storage bin, future trailer project
A little lift to accommodate on road-off-road tires and torsion axles on the trailer to clear obstacles on the old skidder trails that butt up to wilderness drainages..camping, fishing and hunting at its best!!
Comment