Announcement

Collapse
No announcement yet.

B6T Festiva Review

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • B6T Festiva Review

    Before I review the car here’s a little background on myself. Up until I did this swap, I’m not sure I had even changed a tire on a car, maybe once or twice. My mechanic abilities are questionable at best and I get nervous just thinking about it. I’ve never been around cars, never really ridden in any fast cars and I’ve only owned two other cars, an Acura TL and a VW Passat. The fastest car I’ve ever been in was a 400hp Acura Integra Type-R, it could spin its wheels in 3rd. The following review, as you can see, will be compared to the very few experiences I’ve had.

    I got my B6T Festiva back from the muffler shop today and finally got to see what the little car was all about. It has a B6T, obviously, Probe GT intercooler, 255lph fuel pump, cone air filter, stock downpipe and what I thought was 2.5” exhaust, but actually has 2.25” ID, Aspire brake swap front and back, and I believe I’m just running stock boost according to my boost controller valve.
    First off, the suspension and brakes; I have all new parts, KYBs in front and back, 175# and 150# 10 inch springs (which raises the back way too high by the way, it feels like you're getting dumped out of the seat), Miata Daisy wheels with the cheapest tires from a chain tire shop and ebay brakes. That being said, it feels like it only rides slightly better than stock and 35 MPH feels like 50 MPH. The turning radius…haha… is probably one of the worst radiuses I’ve ever seen, especially for a car that is hardly longer than a Hummer is wide. It barely holds the road, my Passat can take turns faster than this thing, and this may be the cheap tire issue. Speed bumps suddenly turn this thing into a 1970s Buick with blown suspension; it’s just loud and rough and feels like what it costs. The braking is laughable, really have to stomp to stop quickly, but maybe my pads just to need to be broken in, after all, I went with the cheapest of the cheap.

    On to the engine. This car pulls hard! Even getting a little torque steer! Remember, I’m only on stock boost. I haven’t gone all out, but from the dozen or so pulls I’ve done, it’s up there with the fastest car I’ve been in. After ~2750 RPM it just screams. As I was driving home from the muffler shop I did a little pull in 2nd, and about a minute later some little ricer passed me while mean mugging the hell out of me. He knew this $500 beater just did a harder pull than his $25,000 Acura will ever do. If I could have it all, I’d want more low-end power, the lag is just a little much, maybe a combo-charger or something, that’d be pretty farfetched though. I'm also using the stock Festiva 4-speed transmission, which is just not meant for speeds over 50. I’m interested to see what happens when I give my chipped ECU a try and turn up the boost, and for the future, a vj11 hybrid, bigger downpipe and g25mr. I’d also like to lower the car quite a bit as it rides kind of high, yet the tow hooks still hit the ground.

    Overall, for the cost of this whole project, I’m real happy. Anyone looking for a good power to cost ratio swap, this has to be up there with the best.

  • #2
    Do you have a build thread ?
    Last edited by 91green; 06-03-2014, 10:22 PM.
    93 Festiva L Aqua(Fern) 5speed 218,000kms-DD and holding on (rusting )
    93 Festiva L Caymen green Metallic 156,000km. 5speedOngoing project
    90 Festiva L Bright Blue Metallic 36,000km,5speed, my rust free BPproject.

    Comment


    • #3
      I don't, sorry.

      Comment


      • #4
        post some pictures!!

        Comment


        • #5
          EDIT: NVM lol
          Last edited by TorqueEffect; 06-04-2014, 12:00 AM.
          1991 Ford Festiva BP (Full Aspire/Rio Swap) (337k Miles) (Around 95k Engine)
          2002 Chevy Cavalier LS Sport 2.2L DOHC Ecotec (Threw a Rod)
          1998 Chevy Monte Carlo LS 3.1 V6 (225k miles) Best MPG = 28

          Comment


          • #6
            The turn radius in my stocker is about 80% of the width of my residential street.

            Sent from my SCH-I605 using Tapatalk
            1990 White L-Plus 5-speed rust-machine
            Scrapped

            1991 Blue L 5-speed
            daily driver, intermittent project

            1993 rustless wonder
            A shell, awaiting suspension, brakes, and B6T

            Comment


            • #7
              The turning radius may be from the tire size or me not turning the wheel all the way. I'm also learning to drive it a little better, for instance, revving higher before letting out the clutch can make up for the lack of low-end torque. Also the car holds the road a little better than I thought. Without power steering it gives a feeling that I'm losing it on turns, but I think its just the perception from the steering wheel pushing back. Heat in the tires helps too. The only thing that's bugging me is how bad the whole call squeaks going over bumps, but I suppose I could fix that if I tried.

              Comment


              • #8
                The squeaks happen to me too. Also, if you have an aspire swap, and aspire brake booster and aspire or escort gt master cylinder would help braking a ton.
                1990 White L-Plus 5-speed rust-machine
                Scrapped

                1991 Blue L 5-speed
                daily driver, intermittent project

                1993 rustless wonder
                A shell, awaiting suspension, brakes, and B6T

                Comment


                • #9
                  I'm glad to hear someone hung an Aspire suspension on this B6 swap. For the life of me I couldn't imagine having 100 hp on tap with measly OEM Festy discs and springs.

                  Comment

                  Working...
                  X